Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, "Optimum Design of Membrane-type LNG Tanks for Installing Insulation", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10
International Conference
2022.07.26 15:51
Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, "Optimum Design of Membrane-type LNG Tanks for Installing Insulation", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10
조회 수 69
| Abstract | When operating an LNG carrier, maintaining the internal temperature of LNG tanks is one of the most important factors. In order to transport cryogenic LNG, insulation panels are installed on the inner walls of the LNG tanks. Meanwhile, during the production process of the LNG tanks, the inner walls of the LNG tanks are not flat and can have flexion. If the insulation panels to be installed on the inner walls of the LNG tanks are not flat and their slopes are large, the insulation efficiency may decrease, and dynamic fatigue may increase. Therefore, wedges to support the insulation panels are installed on the inner walls of the LNG tanks. In addition, mastic ropes are installed under the insulation panels to fill the gap between the inner walls and the insulation panels. In this process, if the mastic ropes are excessively used, the unnecessary cost is incurred. On the other hand, if the usage of the mastic ropes decreases, the insulation panels may be inclined, and the insulation efficiency may decrease. Therefore, in this study, we proposed an optimization method to minimize the total amount of mastic ropes used in the membrane-type LNG tanks while satisfying the flatness of the insulation panels within the allowable criteria. To verify the effectiveness of the proposed method, it was applied to the examples and the result was compared with the manual design. As a result, it was confirmed that the proposed method could reduce the usage of the mastic ropes by about 30% as compared with the manual design. |
|---|---|
| Publication Date | 2022-11-07 |
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Control of the Underactuated Gantry Crane for the Block Erection Operation in the Shipyard", MIM 2019, Berlin, Germany, 2019.08.28-30
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Dynamics-based Collision Analysis for Block Erection in Shipyard", Proceedings of the 30th Asian-Pacific TEAM 2016, Mokpo, Korea, 2016.10.10-13
-
Hye-Won Lee, Myung-Il Roh, Luman Zhao, Seung-Ho Ham, Nakwan Kim, Chan-Woo Yu, "Integrated Development Environment Of Autonomic Software for USV (Unmanned Surface Vehicle) Based on Ros (Robot Operating System)", Proceedings of ICCAS 2017, Singapore
-
Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, Kuk-Jin Kang, Seong-Yeob Jung, "Arctic Sea Route Planning Based on POLARIS Rule", Proceedings of ISOPE 2019, Honolulu, Hawaii, pp. 875-877, 2019.06.16-21
-
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Woo-Young Choi, Chan-Young Lee, Kyung-Min Seo, Dong-Chul Lee, "Simulation-Based Performances Analysis for Naval Ships at the Initial Design Stage", Proceedings of ISOPE 2016, Rhodes, Greece
-
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Hye-Won Lee, Sol Ha, "Physics-based Simulation of Offshore Installation Operations Considering Ocean Environmental Loads and Operating Conditions", Proceedings of ASEM 2015, Korea
-
Dong-Guen Jeong, Myung-Il Roh, Ki-Su Kim, Jun-Sik Lee, Dae-Hyuk Kim, Wang-Seok Jang, "A Route Planning Method for Coastal Navigation of Small Ships", Proceedings of ICCAS 2022, Yokohama, Japan, pp. 153-156, 2022.09.13-15
-
Dong-Guen Jeong, Myung-Il Roh, Ki-Su Kim, Jun-Sik Lee, Dae-Hyuk Kim, Wang-Seok Jang, "A Method for Route Planning of Small Ships in Coastal Areas", Proceedings of ICDM 2022, Si-Heung, Korea, 2022.04.28-29
-
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, Hoon-Kyu Oh, Sang-Ok Lee, "Optimum Layout Design of Wedges of Panel for an LNG Tank Considering Amount of Resin Ropes", Proeedings of ISOPE 2019, Honolulu, Hawaii, pp. 1289-1292, 2019.06.16-21
