Hyewon Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE (Asian Conference on Design and Digital Engineering) 2016, Jeju, Korea, 2016.10.25-28
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28
첨부 '1' |
---|
Abstract | Mostly, the ships and offshore plants are divided by several blocks to be erected. Because the block contains several outfitting installed before the erection stage, collision between the blocks is one of the main reasons to delay the operation. Moreover, in case of ships including tanks such as LPG or LNG carrier, the tank should be erected inside the hull which can cause collisions between them during the erection. Therefore, the collision should be carefully checked before the operation. Even though the collision is checked statically, the unexpected collision can be occurred due to the environmental loads. Thus, the collision analysis based on multibody system dynamics is performed in this study. Generally, there are 2 methods for the collision analysis, impulse response method and force-based (penalty) method. Traditionally, the impulse response method has been commonly used in collision analysis. However, it cannot be used to the multibody systems because the method calculates the velocity of the single body directly. Furthermore, the collision forces are not calculated in the impulse response method. Therefore, in this study, the force-based (penalty) method is applied to consider the collisions in multibody systems, and calculate the collision forces. To evaluate the effectiveness of the method, it is applied to LPG tank erection by using floating crane. |
---|---|
Publication Date | 2016-10-27 |
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Dynamics-based Collision Analysis for Block Erection in Shipyard", Proceedings of the 30th Asian-Pacific TEAM 2016, Mokpo, Korea, 2016.10.10-13
-
Hye-Won Lee, Myung-Il Roh, Luman Zhao, Seung-Ho Ham, Nakwan Kim, Chan-Woo Yu, "Integrated Development Environment Of Autonomic Software for USV (Unmanned Surface Vehicle) Based on Ros (Robot Operating System)", Proceedings of ICCAS 2017, Singapore
-
Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, Kuk-Jin Kang, Seong-Yeob Jung, "Arctic Sea Route Planning Based on POLARIS Rule", Proceedings of ISOPE 2019, Honolulu, Hawaii, pp. 875-877, 2019.06.16-21
-
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Woo-Young Choi, Chan-Young Lee, Kyung-Min Seo, Dong-Chul Lee, "Simulation-Based Performances Analysis for Naval Ships at the Initial Design Stage", Proceedings of ISOPE 2016, Rhodes, Greece
-
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Hye-Won Lee, Sol Ha, "Physics-based Simulation of Offshore Installation Operations Considering Ocean Environmental Loads and Operating Conditions", Proceedings of ASEM 2015, Korea
-
Dong-Guen Jeong, Myung-Il Roh, Ki-Su Kim, Jun-Sik Lee, Dae-Hyuk Kim, Wang-Seok Jang, "A Route Planning Method for Coastal Navigation of Small Ships", Proceedings of ICCAS 2022, Yokohama, Japan, pp. 153-156, 2022.09.13-15
-
Dong-Guen Jeong, Myung-Il Roh, Ki-Su Kim, Jun-Sik Lee, Dae-Hyuk Kim, Wang-Seok Jang, "A Method for Route Planning of Small Ships in Coastal Areas", Proceedings of ICDM 2022, Si-Heung, Korea, 2022.04.28-29
-
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, Hoon-Kyu Oh, Sang-Ok Lee, "Optimum Layout Design of Wedges of Panel for an LNG Tank Considering Amount of Resin Ropes", Proeedings of ISOPE 2019, Honolulu, Hawaii, pp. 1289-1292, 2019.06.16-21
-
Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, "Optimum Design of Membrane-type LNG Tanks for Installing Insulation", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10