Skip to content
Extra Form
Abstract In general, an OSV (Offshore Support Vessel) installs an offshore structure which is laid on its deck or an adjacent transportation barge by lifting the offshore structure with its own crane, by moving in the air, and by lowering down into the sea. There are three major considerations during these operations. First, the collision does not occur due to the relative motion between the offshore structure and the OSV or the transportation barge when lifting the offshore structure. Second, the lifted offshore structure should be adequately moved without any significant and undesirable pendulum motions in the aspect of control. Third, at the moment that the offshore structure penetrates the water surface, the slamming impact force and the varying buoyancy force should be considered. Therefore, this study proposes a physics-based simulation system to consider these three major considerations. To evaluate the applicability of the system, it was applied to some examples.
Publication Date 2015-08-26
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Hye-Won Lee, Sol Ha, "Physics-based Simulation of Offshore Installation Operations Considering Ocean Environmental Loads and Operating Conditions", Proceedings of ASEM(Advances in Structural Engineering and Mechanics) 2015, Incheon, Korea, pp. 1-8, 2015.08.25-29

  1. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Toward Advanced Mooring Analysis of a Floating Crane Based on Flexible Multibody Dynamics", Proceedings of SUTTC(The Society for Underwater Technology Technical Conference) 2017, Haikou, China, 2017.11.23-24

  2. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Ship Mooring Design Based on Flexible Multibody Dynamics", Proceedings of the 13th IMDC, Helsinki, Finland, pp. 563-566, 2018.06.10-14

  3. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Modeling of a Mooring System Based on Flexible Multibody Dynamics Considering Contact with Seabed", Proceedings of the 9th ACMD 2018, Xian, China, 2018.08.19-23

  4. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Method for the Accurate and Automatic Operation of Offshore Floating Cranes for the Block Erection in Shipyards", Proceedings of OMAE 2020, Held in Virtual Conference, 2020.08.03-07

  5. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Control of the Underactuated Gantry Crane for the Block Erection Operation in the Shipyard", MIM 2019, Berlin, Germany, 2019.08.28-30

  6. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28

  7. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Dynamics-based Collision Analysis for Block Erection in Shipyard", Proceedings of the 30th Asian-Pacific TEAM 2016, Mokpo, Korea, 2016.10.10-13

  8. Hye-Won Lee, Myung-Il Roh, Luman Zhao, Seung-Ho Ham, Nakwan Kim, Chan-Woo Yu, "Integrated Development Environment Of Autonomic Software for USV (Unmanned Surface Vehicle) Based on Ros (Robot Operating System)", Proceedings of ICCAS 2017, Singapore

  9. Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, Kuk-Jin Kang, Seong-Yeob Jung, "Arctic Sea Route Planning Based on POLARIS Rule", Proceedings of ISOPE 2019, Honolulu, Hawaii, pp. 875-877, 2019.06.16-21

  10. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Woo-Young Choi, Chan-Young Lee, Kyung-Min Seo, Dong-Chul Lee, "Simulation-Based Performances Analysis for Naval Ships at the Initial Design Stage", Proceedings of ISOPE 2016, Rhodes, Greece

Board Pagination Prev 1 ... 5 6 7 8 9 10 11 12 13 14 Next
/ 14

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소