이원준, 이규열, 권오환, 노명일, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 2002년도 한국CAD/CAM학회 학술발표회, 서울, pp. 75-87, 2002.01.30
이원준, 이규열, 권오환, 노명일, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 2002년도 한국CAD/CAM학회 학술발표회, 서울, pp. 75-87, 2002.01.30
첨부 '1' |
---|
Abstract | In the initial stages of ship design, designers represent geometry. arrangement and dimension of hull structures with 2D geometric primitives such as points, lines, arcs, and drawing symbols. However, these design information defined in the drawing sheet require mor intelligent translation processes by the designers in the next design stages. Thus, the loss of design semantics could be occureed and following design processes could be delayed, In the initial design stages, it is not easy to adopt commercial 3D CAD systems require detailed input for geometry definition. In this study, a semantic product model data structure was proposed, and an initail structural CAD system was developed based on the proposed data structure. Contents of the proposed data structure are filled with minimal input of the designers and then 3D solid model and production material information can be automatically generated as occasion demands. Finally, the applicability of the proposed semantic product model data strcture and the developed initial structural CAD system was verified through application to deadweight 300,300 ton VLCC product modeling procedure. |
---|---|
Publication Date | 2002-01-30 |
-
이원준, 이규열, 노명일, 권오환, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 201-212, 2004.02.12-14
-
정혁수, 이규열, 노명일, "파이프 라우팅 비용을 고려한 선박 기관실의 최적 장비 배치 설계에 관한 연구", 2003년도 대한조선학회 추계학술발표회, 경주, pp. 105-113, 2003.10.30-11.01
-
노명일, 이규열, 이상욱, 임중현, 강성찬, "초기 및 상세 구조 설계 지원을 위한 선체 구조 CAD 시스템 개발", 2003년도 대한조선학회 추계학술발표회, 경주, pp. 140-148, 2003.10.30-11.01
-
서정우, 강성찬, 임중현, 이규열, 이상욱, 조두연, 노명일, "조선 전용 CAD 시스템: EzSHIP", 2003년도 한국CAD/CAM학회 학술발표회, 서울, pp. 23-28, 2003.02.07
-
하솔, 이규열, 노명일, 김태완, "VHDL을 이용한 Implicit Surface Visualization 알고리즘의 하드웨어 구현 방법", 2003년도 한국CAD/CAM학회 학술발표회, 서울, pp. 303-311, 2003.02.07
-
정혁수, 이규열, 노명일, 김태완, "파이프 라우팅을 고려한 최적 장비 배치 알고리즘 개발", 2003년도 한국CAD/CAM학회 학술발표회, 서울, pp. 333-340, 2003.02.07
-
이규열, 노명일, 이상욱, 강성찬, "구획 모델링 및 선박 계산 모듈을 이용한 함정의 최적 구획 배치 시스템 개발", 제6회 조함 세미나, 대전, pp. 97-118, 2002.11.14
-
이규열, 이상욱, 노명일, 강성찬, "비다양체 모델 기반 선박의 형상 및 구획 모델링 시스템 개발", 2002년도 한국CAD/CAM학회 워크샵, 대전, pp. 1-41, 2002.07.05
-
정혁수, 이규열, 노명일, "다중 갑판을 고려한 함정의 최적 격실 배치 설계에 관한 연구", 2002년도 대한조선학회 춘계학술발표회, 부산, pp. 71-78, 2002.04.18-19
-
이원준, 이규열, 권오환, 노명일, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 2002년도 한국CAD/CAM학회 학술발표회, 서울, pp. 75-87, 2002.01.30