Skip to content
Extra Form
Abstract In the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are needed to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection by using the 3D CAD model, which was generated from the initial hull structural modeling system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks by using the relationship between hull structural parts was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, and so on of a building block was proposed as well. And, the simulation method of the block erection by using the composition information and the erection sequence information of erection blocks was developed. Finally, to evaluate the proposed and developed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000ton VLCC(Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.
Publication Date 2005-01-27

노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1126-1137, 2005.01.27-29


List of Articles
번호 분류 제목 Publication Date
273 Domestic Conference 김진혁, 노명일, 공민철, "증강 현실 기술을 이용한 장비의 원격 운영 및 유지 보수 방법", 2019년도 대한조선학회 추계학술발표회, 경주, pp. 196, 2019.10.24-26 file 2019-10-24
272 Domestic Conference 김진혁, 노명일, 김기수, 공민철, "증강 현실 기술을 이용한 장비의 원격 유지 보수", 2020년도 한국CDE학회 동계학술발표회, 평창, pp. 361, 2020.02.05-08 file 2020-02-07
271 Domestic Conference 김진혁, 노명일, 김기수, 여인창, "딥 러닝을 이용한 소형 선박의 성능 예측 방법", 2022년도 한국CDE학회 동계학술발표회, 제주, 2022.02.09-12 file 2022-02-10
270 Domestic Conference 김진혁, 노명일, 김기수, 여인창, 남정우, 이상현, 장영훈, "딥 러닝을 이용한 선형 성능의 우열 관계 예측", 2021년도 대한조선학회 춘계학술발표회, 인천, pp. 572, 2021.05.13-14 file 2021-05-13
269 Domestic Conference 김진혁, 노명일, 김기수, 여인창, 남정우, 이상현, 장영훈, "미세 조정을 적용한 선형 성능 우열 관계 예측 모델의 전이 학습", 2021년도 대한조선학회 추계학술발표회, 군산, pp. 673, 2021.11.04-05 file 2021-11-05
268 Domestic Conference 김진혁, 노명일, 김기수, 여인창, 남정우, 이상현, 장영훈, "전이 학습을 이용한 선형 성능 우열 관계 예측 모델", 2021년도 한국CDE학회 하계학술발표회, 제주, pp. 189, 2021.08.25-28 file 2021-08-25
267 Domestic Conference 김진혁, 노명일, 여인창, "선형 설계를 위한 GNN의 적용 방안 연구", 2023년도 대한조선학회 추계학술발표회, 울산, pp. 450, 2023.11.02-03 file 2023-11-03
266 Domestic Conference 김진혁, 노명일, 여인창, "설계 요구 조건을 고려한 MLP 기반 상선의 선형 변환 방법", 2023년도 대한조선학회 춘계학술발표회, 부산, pp. 309-310, 2023.05.02-04 file 2023-05-04
265 Domestic Conference 김진혁, 노명일, 여인창, "설계 요구 조건을 고려한 국부 변형 기반 상선의 선형 변환 방법", 2023년도 한국CDE학회 동계학술발표회, 평창, pp. 47, 2023.02.08-11 file 2023-02-09
264 Domestic Conference 김진혁, 노명일, 여인창, 김기수, 오민재, "딥 러닝을 이용한 소형 선박의 저항 예측", 2022년도 대한조선학회 춘계학술발표회, 제주, pp. 290, 2022.06.02-04 file 2022-06-02
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 11 ... 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소