Skip to content
Extra Form
Abstract In the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are needed to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection by using the 3D CAD model, which was generated from the initial hull structural modeling system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks by using the relationship between hull structural parts was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, and so on of a building block was proposed as well. And, the simulation method of the block erection by using the composition information and the erection sequence information of erection blocks was developed. Finally, to evaluate the proposed and developed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000ton VLCC(Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.
Publication Date 2005-01-27

노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1126-1137, 2005.01.27-29


List of Articles
번호 분류 제목 Publication Date
263 Domestic Conference 조두연, 차주환, 노명일, 최형순, 황호진, "3D 선체 모델과 Assembly Tree를 이용한 정반 배치 방법론 연구", 2011년도 대한조선학회 춘계학술발표회, 부산, pp. 524-527, 2011.06.02-03 file 2011-06-02
262 Domestic Conference 조두연, 송하철, 노명일, 김태영, 황호진, "3D 선체 모델을 이용한 블록 물류 관제 시뮬레이션 연구", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 418-422, 2010.10.21-22 file 2010-10-21
261 Domestic Conference 정혁수, 이규열, 노명일, 김태완, "파이프 라우팅을 고려한 최적 장비 배치 알고리즘 개발", 2003년도 한국CAD/CAM학회 학술발표회, 서울, pp. 333-340, 2003.02.07 file 2003-02-07
260 Domestic Conference 정혁수, 이규열, 노명일, "파이프 라우팅 비용을 고려한 선박 기관실의 최적 장비 배치 설계에 관한 연구", 2003년도 대한조선학회 추계학술발표회, 경주, pp. 105-113, 2003.10.30-11.01 file 2003-10-30
259 Domestic Conference 정혁수, 이규열, 노명일, "다중 갑판을 고려한 함정의 최적 격실 배치 설계에 관한 연구", 2002년도 대한조선학회 춘계학술발표회, 부산, pp. 71-78, 2002.04.18-19 file 2002-04-18
258 Domestic Conference 정세용, 신현경, 구남국, 노명일, "최적화 기법을 이용한 부유식 해양 구조물의 배치 모델 연구", 2013년도 대한조선학회 춘계학술발표회, 제주, pp. 1049-1057, 2013.05.23-24 file 2013-05-23
257 Domestic Conference 정세용, 신현경, 구남국, 노명일, "최적화 기법을 기용한 부유식 해양 구조물의 다층 배치 모델 연구", 2013년도 대한조선학회 추계학술발표회, 울산, pp. 352-361, 2013.11.07-08 file 2013-11-07
256 Domestic Conference 정세용, 노명일, 신현경, "최적화 기법을 이용한 FPSO 상부 구조 모듈의 배치 방법 연구", 2013년도 한국CAD/CAM학회 학술발표회, 평창, pp. 826-830, 2013.01.30-02.01 file 2013-01-30
255 Domestic Conference 정선경, 노명일, 김기수, 김성균, 정동훈, "복합 성능을 고려한 함정의 배치 설계 방법에 관한 연구", 2016년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 158-161, 2016.01.27-29 file 2016-01-27
254 Domestic Conference 정선경, 노명일, 김기수, "복원성, 운용성 및 생존성을 고려한 함정의 최적 구획 배치 방법", 2016년도 대한조선학회 추계학술발표회, 창원, pp. 215, 2016.11.3-4 file 2016-11-03
Board Pagination Prev 1 ... 3 4 5 6 7 8 9 10 11 12 ... 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소