Skip to content
Extra Form
Abstract A ship or offshore plant is being constructed on the dock by joining several blocks which are the basic units in shipbuilding. In the joining process, the erection and turn-over operation of the blocks are necessary, which can occur interferences between a block and wire ropes. Therefore, it is necessary to calculate contact force exerted on the block because the block can be damaged or structurally deformed if the force becomes larger than its allowable value. If the turn-over simulation is performed with the traditional wire rope model, it is hard to check whether the block and the wire ropes interfere with each other, and to calculate the contact force exerted if any. Therefore, the wire rope model considering the interference is adopted in this study. The method which consists of three procedures is proposed to check the interference and to calculate the contact force. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray collision is applied to detect the interference. Second, the contacted wire rope is divided to cope with the interference. Third, the contact force is calculated. To verify the efficiency and applicability of the proposed method, it is applied to turn-over simulation of a block. As a result, it can be seen that the interference can be checked and the corresponding contact force can be calculated if there is the interference between the block and the wire ropes.
Publication Date 2015-08-19

이혜원, 노명일, 함승호, 구남국, "간섭을 고려한 블록의 물리 기반 Turn-over 시뮬레이션", 2015년도 한국CAD/CAM학회 하계학술발표회, 용인, pp. 45-47, 2015.08.19-20


  1. 함승호, 김기수, 조로만, 이성, 노명일, 하솔, "물리 기반 해석-가상 현실-하드웨어 통합 시뮬레이션 기술 개발", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 182-184, 2015.05.21-23

    CategoryDomestic Conference
    Read More
  2. 정동훈, 함승호, 김기수, 김주성, 노명일, 하솔, "해양 환경 하중과 리프팅 속도를 고려한 해양 작업 지원선의 물리 기반 설치 시뮬레이션", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 803-808, 2015.05.21-23

    CategoryDomestic Conference
    Read More
  3. 함승호, 노명일, 하솔, "다물체 동역학 및 VR 기술을 접목한 조선 생산 및 해양 설치 시뮬레이션", 2015년도 조선해양생산연구회 생산시스템분과 하계논문발표회, 대전, 2015.07.22-23

    CategoryDomestic Conference
    Read More
  4. 이혜원, 노명일, 함승호, 구남국, "간섭을 고려한 블록의 물리 기반 Turn-over 시뮬레이션", 2015년도 한국CAD/CAM학회 하계학술발표회, 용인, pp. 45-47, 2015.08.19-20

    CategoryDomestic Conference
    Read More
  5. 함승호, 노명일, 이성, 조로만, "조선 해양 분야 적용을 위한 해석, 하드웨어 및 가시화 기반의 실시간 시뮬레이션 방법", 2015년도 한국CAD/CAM학회 하계학술발표회, 용인, pp. 149-152, 2015.08.19-20

    CategoryDomestic Conference
    Read More
  6. 하솔, 구남국, 노명일, 함승호, "조선 해양 설계 및 생산 작업 지원을 위한 물리 기반 시뮬레이션 시스템 개발", 2015년도 선박설계연구회 하계연구발표회, 부산, 2015.08.20-21

    CategoryDomestic Conference
    Read More
  7. 김성균, 노명일, 김기수, 정선경, 이성민, "전문가 시스템 기반 해양 플랜트 상부의 최적 배치 방법", 2015년도 한국해양공학회 추계학술발표회, 대전, pp. 467-469, 2015.10.22-23

    CategoryDomestic Conference
    Read More
  8. 김기수, 노명일, 김성용, 안진우, "전문가 시스템 기반 잠수함의 최적 구획 배치 프로그램 개발", 2015년도 함정기술무기체계 세미나, 부산, pp. 65-70, 2015.10.21-22

    CategoryDomestic Conference
    Read More
  9. 이성, 노명일, 함승호, 김기수, 조로만, 정동훈, "HLA를 기반으로 한 해석-가시화 통합 방법 연구 및 조선 해양 협업 시뮬레이션에의 적용", 2015년도 대한조선학회 추계학술발표회, 거제, pp. 453-456, 2015.11.05-06

    CategoryDomestic Conference
    Read More
  10. 홍정우, 노명일, 함승호, 이혜원, 김주성, 정동훈, "유연 다물체계 동역학을 이용한 해양 시추선의 수직 라이저 거동 해석", 2015년도 대한조선학회 추계학술발표회, 거제, pp. 848-852, 2015.11.05-06

    CategoryDomestic Conference
    Read More
Board Pagination Prev 1 ... 7 8 9 10 11 12 13 14 15 16 ... 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소