Skip to content
Extra Form
Abstract In the initial ship design stage of shipyards, the hull form design, the basic design, and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system "EzHULL" and the compartment modeling and ship calculation system "EzCOMPART" for developing finally an integrated ship design system. And, in this study, se present and object-oriented, hull structural design system "EzSTRUCT", which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural part such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slotm, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design, Therem designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawing in the detailed design and production design stage. In this study, the hull structural design system, shich can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study, To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.
Publication Date 2004-02-12

노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14


  1. 조두연, 차주환, 노명일, 최형순, 황호진, "3D 선체 모델과 Assembly Tree를 이용한 정반 배치 방법론 연구", 2011년도 대한조선학회 춘계학술발표회, 부산, pp. 524-527, 2011.06.02-03

    CategoryDomestic Conference
    Read More
  2. 김주영, 최종문, 서연미, 노명일, "실시간 해상 정보 취득과 연료 소모량 추정을 기반으로 한 선박 경제 운항 경로 결정 방법", 2011년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1140-1146, 2011.01.26-28

    CategoryDomestic Conference
    Read More
  3. 임병석, 서연미, 최종문, 노명일, "시뮬레이션 기법을 활용한 선박 충돌 회피 전략 도출에 관한 연구", 2011년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1117-1126, 2011.01.26-28

    CategoryDomestic Conference
    Read More
  4. 최종문, 노명일, "유전적 프로그래밍을 이용한 선박의 연료 소모량 추정식 개발", 2011년도 한국CAD/CAM학회 학술발표회, 평창, pp. 887-894, 2011.01.26-28

    CategoryDomestic Conference
    Read More
  5. 서연미, 노명일, 조두연, "최적화 기법을 이용한 트랜스포터의 최적 운영 계획에 관한 연구", 2011년도 한국CAD/CAM학회 학술발표회, 평창, pp. 187-192, 2011.01.26-28

    CategoryDomestic Conference
    Read More
  6. 이준채, 차주환, 노명일, 황지현, 이규열, "LNG FPSO Topside 의 Liquefaction Process 에 대한 Pre-FEED 단계에서의 Dual Mixed Refrigerant Cycle 최적 운전 조건 결정", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 693-707, 2010.10.21-22

    CategoryDomestic Conference
    Read More
  7. 조두연, 송하철, 노명일, 김태영, 황호진, "3D 선체 모델을 이용한 블록 물류 관제 시뮬레이션 연구", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 418-422, 2010.10.21-22

    CategoryDomestic Conference
    Read More
  8. 선석봉, 노명일, 조상래, 송준태, 안형택, 유정수, "잠수정의 개념 설계를 위한 체계 대안 도출 모델 연구", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 715-722, 2010.10.21-22

    CategoryDomestic Conference
    Read More
  9. 최종문, 노명일, "유전적 프로그래밍을 기반으로 한 개선된 연료 소모량 추정 방법", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 638-645, 2010.10.21-22

    CategoryDomestic Conference
    Read More
  10. 김주영, 노명일, "개선된 등시선법을 기반으로 한 선박의 최적 경제 운항 경로 결정 방법", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 630-637, 2010.10.21-22

    CategoryDomestic Conference
    Read More
Board Pagination Prev 1 ... 23 24 25 26 27 28 29 30 31 32 ... 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소