Skip to content
Extra Form
Abstract In the initial ship design stage of shipyards, the hull form design, the basic design, and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system "EzHULL" and the compartment modeling and ship calculation system "EzCOMPART" for developing finally an integrated ship design system. And, in this study, se present and object-oriented, hull structural design system "EzSTRUCT", which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural part such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slotm, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design, Therem designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawing in the detailed design and production design stage. In this study, the hull structural design system, shich can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study, To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.
Publication Date 2004-02-12

노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14


List of Articles
번호 분류 제목 Publication Date
53 Domestic Conference 이준채, 차주환, 노명일, 황지현, 이규열, "LNG FPSO Topside 의 Liquefaction Process 에 대한 Pre-FEED 단계에서의 Dual Mixed Refrigerant Cycle 최적 운전 조건 결정", 2010년도 대한조선학회 추계학술발표회, 창원, pp. 693-707, 2010.10.21-22 file 2010-10-21
52 Domestic Conference 장경식, 윤범상, 이주성, 노명일, "변분 다중 스케일법을 이용한 후향 계단 유동의 대와류 모사", 2010년도 한국유체공학학술대회, 부산, pp. 311-313, 2010.08.18-20 file 2010-08-18
51 Domestic Conference 김주영, 노명일, "해상 상태를 고려한 선박의 최적 운항 경로 결정", 2010년도 한국전산구조공학회 학술발표회, 제주, pp. 493-499, 2010.04.08-09 file 2010-04-08
50 Domestic Conference 임병석, 노명일, "유전 알고리즘을 기반으로 한 조선소 블록 적치장의 최적 배치에 관한 연구", 2010년도 한국CAD/CAM학회 학술발표회, 평창, pp. 553-561, 2010.01.27-29 file 2010-01-27
49 Domestic Conference 김주영, 노명일, "해양 환경 정보를 기반으로 한 선박 경제 운항 시스템 개발에 관한 연구", 2010년도 한국CAD/CAM학회 학술발표회, 평창, pp. 562-570, 2010.01.27-29 file 2010-01-27
48 Domestic Conference 장경식, 이보현, 윤범상, 이주성, 노명일, "변분 다중 스케일법을 이용한 Ret = 180 채널 난류 유동의 대와류 모사", 2009년도 한국전산유체공학회 추계학술발표회, 대전, pp. 56-59, 2009.11.27-28 file 2009-11-27
47 Domestic Conference 임병석, 김주영, 노명일, 이주성, 윤범상, "블록의 출고 시간과 우선 순위를 고려한 블록 적치장의 최적 배치", 2009년도 대한조선학회 추계학술발표회, 문경, pp. 587-589, 2009.10.29-30 file 2009-10-29
46 Domestic Conference 김주영, 임병석, 노명일, 이주성, 윤범상, 권영근, "해상 상태를 고려한 선박 경제 운항 경로 결정에 관한 연구", 2009년도 대한조선학회 추계학술발표회, 문경, pp. 535-542, 2009.10.29-30 file 2009-10-29
45 Domestic Conference 이보현, 장경식, 윤범상, 노명일, 안윤남, 이주성, "변분 멀티 스케일법을 이용한 채널 난류 유동의 대와류 모사", 2009년도 한국해양공학회 추계학술발표회, 거제, pp. 381-384, 2009.10.22-23 file 2009-10-22
44 Domestic Conference 안윤남, 이주성, 노명일, 윤범상, 장경식, "등기하 해석법을 이용한 구조해석에 관한 연구", 2009년도 한국해양공학회 추계학술발표회, 거제, pp. 238-241, 2009.10.22-23 file 2009-10-22
Board Pagination Prev 1 ... 24 25 26 27 28 29 30 31 32 33 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소