Skip to content
Extra Form
Abstract The block erection operations in the shipyards generally include block lifting, transporting, turn-over, and lowering procedure. During the operation, there are potential risks such as interferences with wire ropes, overweight, etc., which can lead to serious accidents. To check such risks in advance, the physics-based simulations are often required before the actual operation. For this, detailed modeling of the equipment and the operation is necessary to reflect the actual situation accurately, which is impossible with conventional modeling methods. Meanwhile, in the actual operation, the position and the orientation of the block should also be precisely controlled to avoid any risks. However, the actual operations are performed manually by the operator, and the cranes used for the erection of the block consist of complex equipment, which makes them difficult to control.
In this study, the detailed modeling of the operation situation and the equipment are introduced for accurate simulation. Then, the control method of the crane is suggested for accurate and efficient control. Firstly, the block turn-over operation by one offshore floating crane (simply, floating crane) and two crawler cranes is simulated considering the interferences between wire ropes and the block. For this, the interaction model between wire rope and the block including contact and friction is suggested. Then, the contact forces exerted on the block are calculated. Secondly, the block lifting by the floating crane is analyzed considering the coupling motion of the floating crane and the mooring system. The interaction among the floating crane, the mooring line, and the seabed is introduced under the various sea condition. Lastly, the control of the floating crane is performed for block lifting, transporting, and turn-over operation. As the floating crane consists of complicated equipment such as booms, equalizers and wire ropes, the control theory of the underactuated mechanical system is adopted. To evaluate the effectiveness and applicability of the proposed method, it was applied to the dynamic analysis of various kinds of block erection operations by using the floating crane. As a result, the proposed method could reflect the actual operation situation properly, and the block was controlled to the desired trajectory.
Publication Date 2020-08-05

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Method for the Accurate and Automatic Operation of Offshore Floating Cranes for the Block Erection in Shipyards", Proceedings of OMAE(International Conference on Ocean, Offshore and Arctic Engineering) 2020, Held in Virtual Conference, 2020.08.03-07


List of Articles
번호 분류 제목 Publication Date
506 Domestic Conference 임중현, 이상욱, 노명일, 이규열, "다면체를 이용한 선박 구획 계산에 관한 연구", 1999년도 대한조선학회 춘계학술발표회, 거제, pp. 103-106, 1999.04.22-23 file 1999-04-22
505 Domestic Conference 노명일, 이규열, "협동 최적화 방법에 의한 다분야 최적화 기법에 관한 연구", 1999년도 대한조선학회 추계학술발표회, 대전, pp. 159-164, 1999.11.11-12 file 1999-11-11
504 Domestic Conference 노명일, 이규열, "협동 최적화 접근방법에 의한 다분야 최적 설계에 관한 연구", 2000년도 한국CAD/CAM학회 학술발표회, 서울, pp. 163-170, 2000.02.11 file 2000-02-11
503 International Conference Kyu-Yeul Lee, Seon-Ho Cho, Myung-Il Roh, "An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis", Proceedings of OptiCon 2000, Newport Beach, USA, pp. 1-13, 2000.10.26-27 file 2000-10-26
502 Domestic Conference 한성남, 이규열, 노명일, "개선된 유전자 알고리즘을 이용한 최적 공간 배치 설계에 관한 연구", 2001년도 한국CAD/CAM학회 학술발표회, 서울, pp. 253-260, 2001.02.09 file 2001-02-09
501 Domestic Conference 이규열, 노명일, "Hybrid Optimization 방법과 CORBA를 이용한 다분야 최적 설계에 관한 연구", 2001년도 한국항공우주학회 학술발표회, 진주, pp. 590-593, 2001.04.14 file 2001-04-14
500 Domestic Conference 한성남, 노명일, 이규열, "최적 공간 배치 설계를 위한 개선된 유전자 알고리즘에 관한 연구", 2001년도 한국경영과학회/대한산업공학회 춘계학술발표회, 양양, pp. 239, 2001.04.27-28 file 2001-04-27
499 International Conference Kyu-Yeul Lee, Myung-Il Roh, Hang-Soon Choi, Woo-Jae Seong, "Development of Hybrid Optimization Method and Its Application to Ship Design Optimization", Proceedings of Pacific 2002 International Maritime Conference, Sydney, Australia, 2002.01.29-31 file 2002-01-29
498 Domestic Conference 이원준, 이규열, 권오환, 노명일, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 2002년도 한국CAD/CAM학회 학술발표회, 서울, pp. 75-87, 2002.01.30 file 2002-01-30
497 Domestic Conference 정혁수, 이규열, 노명일, "다중 갑판을 고려한 함정의 최적 격실 배치 설계에 관한 연구", 2002년도 대한조선학회 춘계학술발표회, 부산, pp. 71-78, 2002.04.18-19 file 2002-04-18
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 51 Next
/ 51

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소