Skip to content
Extra Form
Abstract Recently, free-fall lifeboats are becoming popular due to the fact that many life threatening accidents have occurred with conventional lifeboat systems. Most of the accidents happened during launching and after lowering the boat into the rough seas in high wind. During launch, the lifeboat may hit the sides of the distressed vessel, become severely damaged and occupants may fall into the sea causing injury and even death. It is impossible to launch the lifeboat if the parent vessel is listing significantly or if the falling becomes tangled. After lowering the boat into the water, it may be unable to move away from the distressed vessel if high seas and winds continually push the lifeboat towards the parent vessels or due to the inability of the engine to start. These situations become even more dangerous during fire or when the potential for an explosion exists. Many of the risks associated with conventional lifeboat systems have been substantially reduced by the free-fall lifeboat system. These problems are minimized with the free-fall lifeboat because it is not lowered into the sea. The free-fall lifeboat falls freely into the sea, generating kinetic energy as it does so. The kinetic energy, which is developed, propels the lifeboat away from the distressed vessel during and immediately after water entry. The lifeboat moves away from the danger even if the engine does not operate. This paper presents a method for design modification of a damaged free-fall lifeboat (FFLB) through the result of skid-launching free-fall test in the four falling phase, that is, sliding phase, rotation phase, free-fall phase, and water entry phase. In case of water entry phase, the damage of the free-fall lifeboat has been remedied structurally, not only reduced top deck impact area and impact pressure but also increased the modular factor of the roof deck in order to modified structure of the deck shape. Thus, it can be seen that the proposed method can be applied to improve the existing design of the FFLB.
Publication Date 2014-06-17
John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, "Design Modification of a Damaged Free-Fall Lifeboat for FPSO through the Free-Fall Test", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2014, Busan, Korea, pp. 658-662, 2014.06.15-20

  1. Seung-Ho Ham, Myung-Il Roh, "Multibody Formulation of a Load-out Problem of a Mega Block Using Modular Transporters in Shipbuilding Industry", Proceedings of the 8th ECCOMAS Thematic Conference on Multibody Dynamics, Prague, Czech, 2017.06.19-22

  2. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Analysis of the Subsea Equipment on the Offshore Supply Vessel Using Non-Interpenetration Constraints", International Conference on Mechanical Design and Engineering, HongKong, China, 2017.01.20-22

  3. Seung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimization of Tugboats Operation for Transporting an Offshore Floating Crane in Environmental Disturbance", International Conference on Mechanical Design and Engineering, 2017.01.20-22

  4. Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, "A Simultaneous Optimization Method of the Direction and Speed for Ship Route Planning", Proceedings of Smart Ship Technology 2017, London, England, 2017.01.24-25

  5. Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, "Determination of Economical Ship Route Using Simultaneous Optimization Method", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28

  6. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Collision Analysis of Block Erection by a Floating Crane", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28

  7. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Dynamic Analysis for Design and Production in Shipbuilding", Proceedings of ACDDE 2016, Jeju, Korea, 2016.10.25-28

  8. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Dynamics-based Collision Analysis for Block Erection in Shipyard", Proceedings of the 30th Asian-Pacific TEAM 2016, Mokpo, Korea, 2016.10.10-13

  9. Ju-Sung Kim, Myung-Il Roh, Seung-Ho Ham, Ki-Su Kim, "Dynamic Method for Flooding Simulation of a Damaged Floater Considering Ocean Environmental Loads", Proceedings of the 30th Asian-Pacific TEAM 2016, Mokpo, Korea, 2016.10.10-13

  10. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jung-Woo Hong, "Dynamic Motion Analysis of a Drilling Rig Connected with Flexible Risers based on Flexible Multibody Dynamics", Proceedings of SUTTC 2016, Beijing, China, 2016.09.26-30

Board Pagination Prev 1 ... 3 4 5 6 7 8 9 10 11 12 ... 14 Next
/ 14

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소