Skip to content
Extra Form
Abstract In shipbuilding production, several types of cranes are simultaneously used to effectively handle a building block which is more than hundred tons. For this, one or more operators operate each crane, and the cooperation among the operators is very important. In the previous studies, the maximum tension of wire ropes of the cranes and motion of the block were analyzed computationally during lifting operation based on fixed scenarios with simulation. This couldn’t reflect the interaction during the operation which can cause unexpected results. Therefore, a collaborative simulation system for production in shipyard was developed in this study. The developed system is comprised of three parts. The first part is an input device which generates signals such as hoisting up and down of the wire ropes of the cranes. The second part is a dynamics engine which receives the signals from several operators and reflects them as a simulation scenario. The last part is a display device which is used to share simulation results between the workers and visualizes the simulation results in multi-views on the network. Finally, the developed system was applied to a block erection process which is operated by three crane operators and one commander. As a result, it is shown that the developed system can be used to simulate or train the collaborative work of the operators in shipyard.
Publication Date 2015-02-05

이성, 함승호, 조로만, 하솔, 노명일, "조선소 생산 작업 지원을 위한 VR 기반 협업 시뮬레이션에 관한 연구", 2015년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 282-286, 2015.02.04-06


  1. Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Shin-Hyung Kim, Jin-Ho Hwang, "Lug Arrangement Design Based on the Optimization Technique and the Dynamic Analysis for Safe Block Lifting in Shipbuilding", Proceedings of ISOPE 2016, Rhodes, Greece

  2. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Woo-Young Choi, Chan-Young Lee, Kyung-Min Seo, Dong-Chul Lee, "Simulation-Based Performances Analysis for Naval Ships at the Initial Design Stage", Proceedings of ISOPE 2016, Rhodes, Greece

  3. No Image 09Jun
    by
    in Domestic Conference

    조로만, 노명일, 함승호, 이성, 이혜원, “물리 기반 해석을 접목한 해양 작업 지원선의 크레인 HIL Simulation”, 2016년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 534-536, 2016.01.27-29

  4. No Image 03Jun
    by
    in Domestic Conference

    함승호, 노명일, 조로만, "통합 시뮬레이션 기법을 활용한 해양 작업 지원선 크레인의 AHC (Active Heave Compensator) HIL (Hardware-In-the-Loop) 시뮬레이션", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 335, 2016.05.19-20

  5. No Image 26May
    by
    in Domestic Conference

    정동훈, 노명일, 함승호, 이찬영, "함정 설계 단계에서의 성능 분석을 위한 시뮬레이션 프레임워크", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 326, 2016.05.19-20

  6. No Image 26May
    by
    in Domestic Conference

    김성훈, 노명일, 김기수, "하둡과 R 언어를 이용한 조선 해양 분야에서의 빅데이터 활용 연구", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 323, 2016.05.19-20

  7. No Image 23May
    by
    in Domestic Conference

    이성민, 노명일, 김기수, 함승호, "최적화 기법을 이용한 블록의 러그 배치 설계 방법", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 417, 2016.05.19-20

  8. No Image 23May
    by
    in Domestic Conference

    노명일, 김기수, 이성민, 함승호, "해양 프로젝트에서의 중량 추정의 불확실성에 대한 연구", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 6-8, 2016.05.19-20

  9. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Hardware-In-the-Loop Simulation for a Heave Compensator of an Offshore Support Vessel", Proceedings of OMAE 2016, Busan, Korea, pp. 1-5, 2016.06.19-24

  10. Ki-Su Kim, Myung-Il Roh, Sung-Kyoon Kim, "An Arrangement Design Framework for Ships and Offshore Plants Based on Expert System and Optimization Technique", Proceedings of OMAE 2016, Busan, Korea, pp. 1-5, 2016.06.19-24

Board Pagination Prev 1 ... 28 29 30 31 32 33 34 35 36 37 ... 51 Next
/ 51

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소