Skip to content
Extra Form
Abstract Recently, there are needs to lift and transport heavy load, whose weight exceeds the capacity of a single crane in shipyard. Therefore, multi cranes are often used to lift the loads simultaneously. Generally, since the process using multi cranes is more dangerous than using single crane, the dynamic simulation of the process is needed to prevent fatal accidents. Therefore, the simulation program for the dynamic response analysis of the cranes and the heavy loads was developed. In general, the simulations are carried out under the idle condition, but the environmental condition in the field is not idle. Therefore, there are differences between the results of the simulation and the measured data from the field, and these differences seems to be caused by uncertainty of synchronization between the cranes. In this paper, the block lifting simulation using multi-cranes are conducted considering uncertainty of synchronization, such as the difference in the speed of hoisting up and operating time among the cranes. The results of the simulation are compared with the measured data from the ship yards.
Publication Date 2013-05-23

구남국, 하솔, 이규열, 노명일, "동기화의 불확실성을 고려한 멀티 크레인의 중량물 리프팅 시뮬레이션", 2013년도 대한조선학회 춘계학술발표회, 제주, pp. 248-254, 2013.05.23-24


  1. 이혜원, 노명일, 함승호, 구남국, "간섭을 고려한 블록의 물리 기반 Turn-over 시뮬레이션", 2015년도 한국CAD/CAM학회 하계학술발표회, 용인, pp. 45-47, 2015.08.19-20

    CategoryDomestic Conference
    Read More
  2. 정동훈, 함승호, 김기수, 김주성, 노명일, 하솔, "해양 환경 하중과 리프팅 속도를 고려한 해양 작업 지원선의 물리 기반 설치 시뮬레이션", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 803-808, 2015.05.21-23

    CategoryDomestic Conference
    Read More
  3. 함승호, 김기수, 조로만, 이성, 노명일, 하솔, "물리 기반 해석-가상 현실-하드웨어 통합 시뮬레이션 기술 개발", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 182-184, 2015.05.21-23

    CategoryDomestic Conference
    Read More
  4. 홍정우, 함승호, 이혜원, 노명일, 하솔, "유연 다물체 동역학 기반의 박판 블록 리프팅 시뮬레이션", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 809-813, 2015.05.21-23

    CategoryDomestic Conference
    Read More
  5. 김성균, 김기수, 홍정우, 하솔, 노명일, "해양 플랜트 상부의 통합 배치 최적화 방법에 관한 연구", 2015년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 287-291, 2015.02.04-06

    CategoryDomestic Conference
    Read More
  6. 이성, 함승호, 조로만, 하솔, 노명일, "조선소 생산 작업 지원을 위한 VR 기반 협업 시뮬레이션에 관한 연구", 2015년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 282-286, 2015.02.04-06

    CategoryDomestic Conference
    Read More
  7. 김주성, 함승호, 김기수, 이혜원, 노명일, 하솔, "해저 저질과 환경 하중을 고려한 침몰 선체 인양 시뮬레이션", 2015년도 한국CAD/CAM학회 동계학술발표회, 평창, pp. 292-299, 2015.02.04-06

    CategoryDomestic Conference
    Read More
  8. 하솔, 구남국, 노명일, 이규열, 함승호, 김기수, "선박 및 해양 플랜트의 설계 및 생산을 위한 다물체계 동역학 시뮬레이터 개발", 2014년도 대한조선학회 추계학술발표회, 창원, pp. 208-212, 2014.11.06-07

    CategoryDomestic Conference
    Read More
  9. 이규열, 하솔, 노명일, "해양 시추 안전 설계", 2014년도 대한조선학회 추계학술발표회, 창원, pp. 967-978, 2014.11.06-07

    CategoryDomestic Conference
    Read More
  10. 홍정우, 함승호, 이혜원, 노명일, 하솔, "크레인 붐의 유연성를 고려한 Subsea 장비의 인양 시뮬레이션", 2014년도 대한조선학회 추계학술발표회, 창원, pp. 958-962, 2014.11.06-07

    CategoryDomestic Conference
    Read More
Board Pagination Prev 1 ... 18 19 20 21 22 23 24 25 26 27 ... 34 Next
/ 34

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소