Skip to content
Extra Form
Abstract The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating production storage and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses the separated and pre-treated natural gas into LNG. The volume of liquid occupies about 1/600th the volume of the natural gas. The cycles in the liquefaction process consist of seven main pieces of equipment: compressor, sea water cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Many different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study first proposes the generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With the minimum amount of power required for the compressors, the optimized liquefaction cycle then is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle, which is considered for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions is decreased by 1.2% compared with that of the DMR cycle.
Publication Date 2012-06-17

Ji-Hyun Hwang, Nam-Kug Ku, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Synthesis of LNG FPSO Liquefaction Cycles", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2012, Rhodes, Greece, pp. 927-935, 2012.06.17-22


List of Articles
번호 분류 제목 Publication Date
448 International Conference Jin-Hyeok Kim, Myung-Il Roh, In-Chang Yeo, Ki-Su Kim, "Estimation of the Hydrodynamic Performance of the Parameterized Hull Forms Using Deep Learning", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10 2022-11-06
447 International Conference Yeongmin Jo, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "A Ship Tracking Method under Dynamic Characteristic Changes with LSTM", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10 2022-11-06
446 International Conference Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, "Optimum Design of Membrane-type LNG Tanks for Installing Insulation", Proceedings of G-NAOE 2022, Changwon, Korea, 2022.11.06-10 2022-11-07
445 Domestic Conference 박정호, 노명일, 이혜원, 조영민, 손남선, "영상 기반의 선박 추적을 위한 개선된 방법", 2022년도 대한조선학회 춘계학술발표회, 제주, p.311, 2022.06.02-04 file 2022-06-02
444 Domestic Conference 김진혁, 노명일, 여인창, 김기수, 오민재, "딥 러닝을 이용한 소형 선박의 저항 예측", 2022년도 대한조선학회 춘계학술발표회, 제주, pp. 290, 2022.06.02-04 file 2022-06-02
443 International Conference Dong-Guen Jeong, Myung-Il Roh, Ki-Su Kim, Jun-Sik Lee, Dae-Hyuk Kim, Wang-Seok Jang, "A Method for Route Planning of Small Ships in Coastal Areas", Proceedings of ICDM 2022, Si-Heung, Korea, 2022.04.28-29 2022-04-28
442 International Conference Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "A Block Lifting Method with Wire Ropes Based on Deep Reinforcement Learning", Proceedings of ICDM 2022, Si-Heung, Korea, 2022.04.28-29 2022-04-28
441 Domestic Conference 이혜원, 노명일, 박정호, "선박 추적을 위한 센서 데이터 연관 방법", 2022년도 대한조선학회 춘계학술발표회, 제주, pp. 309, 2022.06.02-04 file 2022-06-02
440 Domestic Conference 여인창, 노명일, 전도현, 장석호, 허재원, "안전성과 경제성을 고려한 배관 지지대 설계", 2022년도 대한조선학회 춘계학술발표회, 제주, p. 403, 2022.06.02-04 file 2022-06-02
439 Domestic Conference 공민철, 노명일, 김기수, 김종오, 박호균, 김주성, "PDF 문서 내 변수 인식 및 가시화 프로그램 개발", 2022년도 대한조선학회 춘계학술발표회, 제주, p. 198, 2022.06.02-04 file 2022-06-02
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 47 Next
/ 47

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소