Skip to content
Extra Form
Abstract The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating production storage and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses the separated and pre-treated natural gas into LNG. The volume of liquid occupies about 1/600th the volume of the natural gas. The cycles in the liquefaction process consist of seven main pieces of equipment: compressor, sea water cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Many different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study first proposes the generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With the minimum amount of power required for the compressors, the optimized liquefaction cycle then is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle, which is considered for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions is decreased by 1.2% compared with that of the DMR cycle.
Publication Date 2012-06-17

Ji-Hyun Hwang, Nam-Kug Ku, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Synthesis of LNG FPSO Liquefaction Cycles", Proceedings of ISOPE(International Society of Offshore and Polar Engineers) 2012, Rhodes, Greece, pp. 927-935, 2012.06.17-22


List of Articles
번호 분류 제목 Publication Date
486 Domestic Conference 노명일, 이상욱, 이규열, 임중현, 강성찬, "통합 선박 설계 지원을 위한 객체 지향 초기 선체 구조 설계 시스템 개발", 2004년도 한국CAD/CAM학회 학술발표회, 평창, pp. 591-600, 2004.02.12-14 file 2004-02-12
485 Domestic Conference 노명일, 이규열, 이상욱, 임중현, 강성찬, "초기 선체 구조 CAD 시스템을 이용한 생산 계획용 물량 정보 생성", 2004년도 대한조선학회 춘계학술발표회, 통영, pp. 831-838, 2004.04.22-23 file 2004-04-22
484 International Conference Kyu-Yeul Lee, Myung-Il Roh, Sang-Uk Lee, Joong-Hyun Rhim, Seong-Chan Kang, Jong-Hyun Kim, Jeong-Youl Lee, "Development of a Hull Structural CAD System for an Initial Design Stage", Proceedings of PRADS 2004, Germany, pp. 98-105, 2004.09.12-17 file 2004-09-12
483 Domestic Conference 노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1126-1137, 2005.01.27-29 file 2005-01-27
482 Domestic Conference 노명일, 이규열, "초기 공정 및 일정 계획을 위한 선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 대한조선학회 춘계학술발표회, 부산, pp. 506-520, 2005.05.12-13 file 2005-05-12
481 Domestic Conference 노명일, 유성진, 이규열, 방경운, 서정우, "선체 구조 모델의 위상 정보 재구성을 통한 구조 해석 모델 생성", 2005년도 대한조선학회 추계학술발표회, 용인, pp. 275-287, 2005.11.03-04 file 2005-11-03
480 Domestic Conference 최우영, 이규열, 노명일, "선체 구조와의 연관성을 고려한 쾌속 배관 모델링 방법", 2005년도 대한조선학회 추계학술발표회, 용인, pp. 553-560, 2005.11.03-04 file 2005-11-03
479 Domestic Conference 강용우, 김훈주, 이호윤, 노명일, "골리앗 크레인 공주(空走) 최소화를 통한 리프팅 순서 계획 최적화", 2005년도 대한조선학회 추계학술발표회, 용인, pp. 513-517, 2005.11.03-04 file 2005-11-03
478 Domestic Conference 노명일, 유성진, 이규열, "선체 구조 모델 기반의 구조 해석 모델 생성 시스템 개발", 2006년도 한국CAD/CAM학회 학술발표회, 평창, pp. 262-271, 2006.02.09-11 file 2006-02-09
477 Domestic Conference 노명일, 최우영, 이규열, "쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발", 2006년도 한국CAD/CAM학회 학술발표회, 평창, pp. 272-279, 2006.02.09-11 file 2006-02-09
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 ... 51 Next
/ 51

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소