Skip to content
Atachment
첨부 '1'
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
Extra Form
Abstract A ship hull design from the given offset points is one of the ways to create a new ship hull surface. The offset points are the rows of points obtained from the basis ship hull using the plane-surface intersection. A designer can create a hull surface for a new ship using the variation methods such as dimensional variation method and CP variation method. The created hull surface is presented using NURBS. The NURBS surface is a standard format in current CAD system but it has some drawbacks, for example, tensor product property, difficulty in local refinement, and not allowing T-junction, etc. Fore and after body shape of a ship hull is very complicated and it causes many control points of NURBS surface because of the tensor product property. In addition, more control points are required to create watertight hull surface among the NURBS surfaces of hull. T-spline is proposed by T. Sederberg to overcome these drawbacks of the tensor product property and it is extended to the computational analysis area recently. A number of control points can be reduced with the required continuity between the surfaces because the T-junction is allowed using T-spline. In this paper, the T-spline surface generation method is suggested to design the ship hull form from the given offset points. The result is compared with the NURBS surface and the benefit of the T-spline will be discussed.
Publication Date 2017-09-25

Min-Jae Oh, Myung-Il Roh, "Hull Form Surface Generation Using T-Spline", Proceedings of the 31st Asian-Pacific TEAM(Technical Exchange and Advisory Meeting on Marine Structures) 2017, Osaka, Japan, 2017.09.25-28


List of Articles
번호 분류 제목 Publication Date
426 Domestic Conference 정동훈, 함승호, 김기수, 김주성, 노명일, 하솔, "해양 환경 하중과 리프팅 속도를 고려한 해양 작업 지원선의 물리 기반 설치 시뮬레이션", 2015년도 대한조선학회 춘계학술발표회, 제주, pp. 803-808, 2015.05.21-23 file 2015-05-22
425 Domestic Conference 정동훈, 노명일, 함승호, 이찬영, "탐지 및 기동 성능을 고려한 함정의 공학급 교전 시뮬레이션 방법 연구", 2016년도 대한조선학회 추계학술발표회, 창원, pp. 214, 2016.11.03-04 file 2016-11-03
424 Domestic Conference 정동훈, 노명일, 함승호, 이찬영, "함정 설계 단계에서의 성능 분석을 위한 시뮬레이션 프레임워크", 2016년도 대한조선학회 춘계학술발표회, 부산, pp. 326, 2016.05.19-20 file 2016-05-20
423 Domestic Conference 정동훈, 노명일, 함승호, "공학 모델 기반 함정의 교전 시뮬레이션 방법 연구", 2017년도 한국CDE학회 동계학술발표회, 평창, pp. 807, 2017.02.08-10 file 2017-02-09
422 Domestic Conference 정동근, 노명일, 여인창, 공민철, 김기수, 이준식, 유원철, "다양한 해상 객체를 반영한 소형 선박의 항로 계획법", 2022년도 대한조선학회 추계학술발표회, 창원, 2022.11.09-11 2022-11-11
421 Domestic Conference 정동근, 노명일, 김기수, 이준식, 김대혁, 장왕석, "쿼드 트리를 이용한 소형선의 항로 계획 방법", 2022년도 대한조선학회 춘계학술발표회, 제주, pp. 526, 2022.06.02-04 file 2022-06-02
420 Domestic Conference 정동근, 노명일, 김기수, 이준식, 김대혁, 장왕석, "요트 전용의 연안 항해 프로그램 개발", 2022년도 한국CDE학회 동계학술발표회, 제주, 2022.02.09-12 file 2022-02-11
419 Domestic Conference 정동근, 노명일, 김기수, 이준식, 김대혁, 장왕석, "연안 항해용 소형 선박을 위한 경로 계획 알고리즘", 2021년도 한국CDE학회 하계학술발표회, 제주, pp. 426, 2021.08.25-28 file 2021-08-25
418 Domestic Conference 전도현, 노명일, 힘승호, 오훈규, 이상옥, "내벽 편평도를 고려한 LNG 탱크의 마스틱 로프 최적 배치 설계", 2019년도 한국CDE학회 동계학술발표회, 평창, pp. 202, 2019.01.23-26 file 2019-01-24
417 Domestic Conference 전도현, 노명일, 함승호, 이혜원, "안전한 블록 탑재를 위한 와이어 로프의 초기 장력 탐색 및 강화 학습 기반 제어", 2018년도 조선해양생산연구회 추계학술발표회, 울산, 2018.06.14 file 2018-06-14
Board Pagination Prev 1 ... 4 5 6 7 8 9 10 11 12 13 ... 51 Next
/ 51

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소