노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1126-1137, 2005.01.27-29
노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 2005년도 한국CAD/CAM학회 학술발표회, 평창, pp. 1126-1137, 2005.01.27-29
첨부 '1' |
---|
Abstract | In the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are needed to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection by using the 3D CAD model, which was generated from the initial hull structural modeling system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks by using the relationship between hull structural parts was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, and so on of a building block was proposed as well. And, the simulation method of the block erection by using the composition information and the erection sequence information of erection blocks was developed. Finally, to evaluate the proposed and developed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000ton VLCC(Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage. |
---|---|
Publication Date | 2005-01-27 |
-
박정호, 노명일, 이혜원, 조영민, 손남선, "딥 러닝 기반 다중 카메라 영상을 이용한 해상 장애물 탐지 추적에 관한 연구", 2022년도 한국항해항만학회 추계학술발표회, 부산, pp. 186, 2022.11.10
-
박성우, 오민재, 노명일, "해양 구조물 배관 자재 소요량의 빅데이터 분석", 2019년도 한국CDE학회 동계학술발표회, 평창, pp. 319, 2019.01.23-26
-
박성우, 노명일, 오민재, 김성훈, "빅데이터 기술을 활용한 배관 설계에의 적용 예", 2018년도 한국CDE학회 동계학술발표회, 횡성, pp. 293, 2018.01.23-26
-
박성우, 노명일, 오민재, 김성훈, "빅데이터 기술을 이용한 자재 연관성 평가를 위한 연구", 2017년도 해양플랜트설계연구회 추계워크샵, 목포, 2017.11.16-17
-
박성우, 노명일, 오민재, "빅데이터 기반 선박 및 해양 구조물의 데이터 마이닝 방법", 2018년도 대한조선학회 추계학술발표회, 창원, pp. 211-212, 2018.11.8-9
-
박성우, 노명일, "작업성 및 효율성을 고려한 해양구조물 배관 설계 자동화 방법 연구", 2017년도 대한조선학회 추계학술발표회, 여수, 2017.11.02-03
-
박동규, 노명일, 하지상, "추진 체계 선정을 포함한 무인수상정 초기 제원 최적화 방법", 2024년도 한국CDE학회 동계학술발표회, 평창, p. 241, 2024.01.29-02.01
-
박동규, 노명일, 하지상, "최적화 기법을 활용한 무인 수상정의 초기 제원 결정", 2023년도 대한조선학회 추계학술발표회, 울산, pp. 111, 2023.11.02-03
-
박동규, 노명일, 하지상, "무인 수상정의 개념 설계를 위한 주요 제원 최적화 방법", 2023년도 한국해군과학기술학회 동계학술발표회, 대전, pp. 110-141, 2023.12.07-08
-
노명일, 최우영, 이규열, "쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발", 2006년도 한국CAD/CAM학회 학술발표회, 평창, pp. 272-279, 2006.02.09-11