Skip to content
Extra Form
Abstract The weight information of an FPSO (floating production, storage, and offloading) plant is one of the important data needed to estimate the amount of production material (e.g., plates) needed and to determine the suitable production method for its construction. In addition, the weight information is a key factor that affects the building cost and the production period of the FPSO plant. Although the importance of the weight has long been recognised, the weight, especially of the topside, has been roughly estimated using the existing similar data as well as the designer’s experience. To improve this task, a weight estimation model for FPSO plant topsides was developed in this study using the improved genetic programming (GP) method. For this reason, various past records on the estimation of the weight of the FPSO plant were collected through a literature survey, and then the weight estimation model using GP was established by fixing the independent variables based on these data. In addition, correlation analysis was performed to make up for the weak points of genetic programing, which is apt for inducing overfitting when the number of data is relatively smaller than that of the independent variables. That is, by reducing the number of variables through the analysis of the correlation between the independent variables, an increase in the number of weight data can be expected. Finally, to evaluate the applicability of the suggested model, it was applied to an example of the weight estimation of the FPSO plant topside. Compared with the results of the multiple nonlinear regression analysis that was conducted in the previous study, the results showed that the suggested model can be applied to the weight estimation process of the FPSO plant at the early design stage.
Publication Date 2017-01-01
Role Corresponding Author
Category SCIE
Impact Factor 0.790

Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01


List of Articles
번호 분류 제목 Publication Date
108 International Journal Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01 file 2019-07-01
107 International Journal Won-Jae Lee, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Yeong-Min Cho, Nam-Sun Son, “Detection and Tracking for the Awareness of Surroundings of a Ship Based on Deep Learning”, Journal of Computational Design and Engineering, Vo. 8, No. 5 file 2021-10-01
106 International Journal Tae-Sub Um, Myung-Il Roh, "Optimal Dimension Design of a Hatch Cover for Lightening a Bulk Carrier", International Journal of Naval Architecture and Ocean Engineering, Vol. 7, No. 2, pp. 270-287, 2015.03.01 file 2015-03-01
105 International Journal Sung-Woo Park, Myung-Il Roh, Min-Jae Oh, Seong-Hoon Kim, "Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology", Journal of Ship Production and Design, Vol. 35, No. 3, pp. 220-230, 2019.08.01 file 2019-08-01
104 International Journal Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting", Journal of Ship Production and Design, Vol. 34, No. 2, pp. 119-133, 2018.05.01 file 2018-05-01
103 International Journal Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01 file 2018-06-01
102 International Journal Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Evaluation of Feasibility Index in the Arrangement Design of an Offshore Topside based on the Automatic Transformation of Experts’ Knowledge and the Fuzzy Logic”, Ocean Engineering, Vol. 130, 2017.01.15 file 2017-01-15
101 International Journal Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01 file 2017-04-01
100 International Journal Sung-Jun Lee, Myung-Il Roh, Min-Jae Oh, "Image-based Ship Detection Using Deep Learning", Ocean Systems Engineering, Vol. 10, No. 4, pp. 415-434, 2020.12.01 file 2020-12-01
99 International Journal Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23 file 2018-02-23
» International Journal Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01 file 2017-01-01
97 International Journal Sol Ha, Seong-Ho Seo, Myung-Il Roh, Hyun-Kyoung Shin, "Simplified Nonlinear Model for the Weight Estimation of FPSO Plant Topside Using the Statistical Method", Ships and Offshore Structures, Vol. 11, No. 6, pp. 603-619, 2016.09.01 file 2016-09-01
96 International Journal Sol Ha, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Cell-Based Evacuation Simulation Considering Human Behavior in a Passenger Ship", Ocean Engineering, Vol. 53, pp. 138-152, 2012.10.01 file 2012-10-01
95 International Journal Sol Ha, Nam-Kug Ku, Myung-Il Roh, Ho-Jin Hwang, "Multibody System Dynamics Simulator for Process Simulation of Ships and Offshore Plants in Shipyards", Advances In Engineering Software, Vol. 85, pp. 12-25, 2015.07.01 file 2015-07-01
94 International Journal Sol Ha, Nam-Kug Ku, Myung-Il Roh, "Event-based Scenario Manager for Multibody Dynamics Simulation of Heavy Load Lifting Operations in Shipyards", International Journal of Naval Architecture and Ocean Engineering, Vol. 8, No. 1, pp. 83-101, 2016.01.01 file 2016-01-01
93 International Journal Sol Ha, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Implementation of the Submarine Diving Simulation in a Distributed Environment", International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, pp. 211-227, 2012.09.01 file 2012-09-01
92 International Journal Seung-Min Lee, Jong-Hyeok Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Hye-Won Lee, "An Optimization Model of Tugboat Operation for Conveying a Large Surface Vessel", Journal of Computational Design and Engineering, Vol. 8, No. 2, 2021.04.01 file 2021-04-01
91 International Journal Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01 file 2021-01-01
90 International Journal Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01 file 2018-07-01
89 International Journal Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01 file 2017-10-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소