Skip to content
Extra Form
Abstract It is difficult to observe the potential risks of lifting or turn-over operations in the early stages before a real operation. Therefore, many dynamic simulations have been designed to predict the risks and to reduce the possibility of accidents. These simulations, however, have usually been performed for predetermined and fixed scenarios, so they do not reflect the real-time control of an operator that is one of the most important influential factors in an operation; additionally, lifting or turn-over operations should be a collaboration involving more than two operators. Therefore, this study presents an integrated method for a collaborative simulation that allows multiple workers to operate together in the virtual world. The proposed method is composed of four components. The first component is a dynamic analysis that is based on multibody-system dynamics. The second component is VR (virtual reality) for the generation of realistic views for the operators. The third component comprises the control devices and the scenario generator to handle the crane in the virtual environment. Lastly, the fourth component is the HLA (high-level architecture)-based integrated simulation interface for the convenient and efficient exchange of the data through the middleware. To show the applicability of the proposed method, it has been applied to a block turn-over simulation for which one floating crane and two crawler cranes were used, and an offshore module installation for which a DCR (dual-crane rig) was used. In conclusion, the execution of the proposed method of this study is successful regarding the above two applications for which multiple workers were involved.
Publication Date 2019-07-01
Role Corresponding Author
Category SCIE
Impact Factor 0.930

Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 2, pp. 699-722, 2019.07.01


List of Articles
번호 분류 제목 Publication Date
108 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Ho-Gyun Park, Jong-Oh Kim, "Variable Indexing Method in Rule Documents for Ship Design Using Extraction of PDF Elements", accepted for publication in Journal of Computational Design and Engineering, 2022.11.11 2022-11-11
107 International Journal Jin-Hyeok Kim, Myung-Il Roh et al. "Prediction of the Superiority of the Hydrodynamic Performance of Hull Forms Using Deep Learning", accepted for publication in International Journal of Naval Architecture and Ocean Engineering, 2022.10.21 2022-10-21
106 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23 file 2022-07-23
105 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15 file 2022-02-15
104 International Journal Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, 2022.02.10 file 2022-02-10
103 International Journal Won-Jae Lee, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Yeong-Min Cho, Nam-Sun Son, “Detection and Tracking for the Awareness of Surroundings of a Ship Based on Deep Learning”, Journal of Computational Design and Engineering, Vo. 8, No. 5 file 2021-10-01
102 International Journal Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan) file 2021-09-03
101 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15 file 2021-08-15
100 International Journal Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15 file 2021-08-15
99 International Journal June-Beom Lee, Myung-Il Roh, Ki-Su Kim, “Prediction of Ship Power Based on Variation in Deep Feed-forward Neural Network”, International Journal of Naval Architecture and Ocean Engineering, 2021.08.07 file 2021-08-12
98 International Journal Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01 file 2021-06-01
97 International Journal Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01 file 2021-06-01
96 International Journal Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19 file 2021-05-19
95 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18 file 2021-04-18
94 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01 file 2021-04-01
93 International Journal Seung-Min Lee, Jong-Hyeok Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Hye-Won Lee, "An Optimization Model of Tugboat Operation for Conveying a Large Surface Vessel", Journal of Computational Design and Engineering, Vol. 8, No. 2, 2021.04.01 file 2021-04-01
92 International Journal Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01 file 2021-01-01
91 International Journal Ki-Su Kim, Myung-Il Roh, "Dynamic Flooding Analysis Method for Intermediate Flooding Process of a Ship", Ocean Engineering, Vol. 218, pp. 108173.1-33, 2020.12.15 file 2020-12-15
90 International Journal Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01 file 2020-12-01
89 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01 file 2020-12-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소