Skip to content
Extra Form
Abstract In this paper, the development of a simulation program that can automatically generate equations of motion for mutibody systems in the discrete event simulation framework is presented. The need to analyze the dynamic response of mechanical systems that are under event triggered conditions is increasing. General mechanical systems can be defined as multibody systems that are collections of interconnected rigid bodies, consistent with various types of joints that limit the relative motion of pairs of bodies. For complex multibody systems, a systematic approach is required to efficiently set up the mathematical models. Therefore, a dynamics kernel was developed to automatically generate the equations of motion for multibody systems based on multibody dynamics. The developed dynamics kernel also provides the numerical solver for the dynamic analysis of multibody systems. The general multibody dynamics kernel cannot deal with discontinuous state variables, event triggered conditions, and state triggered conditions, though. To enable it to deal with multibody systems in discontinuous environments, the multibody dynamics kernel was integrated into a discrete event simulation framework, which was developed based on the discrete event system specification (DEVS) formalism. DEVS formalism is a modular and hierarchical formalism for modeling and analyzing systems under event triggered conditions, which are described by discontinuous state variables. To verify the developed program, it was applied to an block-lifting and transport simulation, and dynamic analysis of the system is carried out.
Publication Date 2012-02-01
Role Coauthor
Category Others

Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01


  1. No Image 16Aug
    by
    in International Journal

    Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

  2. No Image 20May
    by
    in International Journal

    Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

  3. No Image 05Aug
    by
    in International Journal

    Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01

  4. No Image 25Jun
    by
    in International Journal

    Min-Chul Kong, Myung-Il Roh, "A Method for Implementing a Ship Navigation Simulator for the Generation and Utilization of Virtual Data", International Journal of Naval Architecture and Ocean Engineering, 2024.06.25

  5. No Image 15Nov
    by
    in International Journal

    Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Ho-Gyun Park, Jong-Oh Kim, "Variable Indexing Method in Rule Documents for Ship Design Using Extraction of PDF Elements", Journal of Computational Design and Engineering, Vol. 9, No. 6, 2022.11.16

  6. No Image 07Jan
    by
    in International Journal

    Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15

  7. No Image 15Apr
    by
    in International Journal

    Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18

  8. No Image 24Jan
    by
    in International Journal

    Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01

  9. No Image 23Apr
    by
    in International Journal

    Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01

  10. No Image 03Oct
    by
    in International Journal

    Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01

  11. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

  12. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

  13. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

  14. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

  15. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01

  16. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

  17. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

  18. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

  19. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Seong-Jin Yoo, "An Algorithm for Generating the Hull Structural Analysis Model Using the Seam Information of the Hull Structure at the Initial Design Stage", Journal of Ship and Ocean Technology, Vol. 10, No. 4, pp. 24-33, 2006.12.01

  20. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, "Rapid Generation of the Piping Model Having the Relationship with a Hull Structure in Shipbuilding", Advances In Engineering Software, Vol. 38, No. 4, pp. 215-228, 2007.04.01

Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소