Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19
https://doi.org/10.3390/pr9050898
첨부 '1' |
---|
Abstract | This study investigates the optimization of the hull form of a tanker, considering the operational efficiency in waves, in accordance with the recent Energy Efficiency Design Index regulation. For this purpose, the total resistance and speed loss of the ship under representative sea conditions were minimized simultaneously. The total resistance was divided into three components: calm water resistance, added resistance due to wind, and to waves. The first two components were calculated using regression formulas, and the last component was estimated using the strip theory, far-field method, and the short-wave correction formula. Next, prismatic coefficient, waterline length, waterplane area, and flare angle were selected as design variables from the perspective of operational efficiency. The hull form was described as a combination of cross-sectional curves. A combination of the method shifting these sections in the longitudinal direction and the Free-Form Deformation method was used to deform the hull. As a result of applying the non-dominated sorting genetic algorithm to a tanker, the hull was deformed thinner and longer, and it was determined that the total resistance and speed loss were reduced by 3.58 and 10.2%, respectively. In particular, the added resistance due to waves decreased significantly compared to the calm water resistance, which implies that the present tendency differs from conventional ship design that optimizes only the calm water resistance. |
---|---|
Publication Date | 2021-05-19 |
Role | Coauthor |
Category | SCIE |
Impact Factor | 2.753 |
Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19
https://doi.org/10.3390/pr9050898
Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01
Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Detection and Response of Multibody Systems Using a Position Difference Method and Non-Interpenetration Constraint in Shipbuilding Simulation", Ocean Engineering, Vol. 195, pp. 1-18, 2020.01.01
Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01
Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01
Seong-Hoon Kim, Myung-Il Roh, Min-Jae Oh, Sung-Woo Park, "Estimation of Ship Operational Efficiency from AIS Data Using Big Data Technology", IJNAOE, Vol. 12, pp. 440-453, 2020.05.21
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01
Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01
Ki-Su Kim, Myung-Il Roh, "Dynamic Flooding Analysis Method for Intermediate Flooding Process of a Ship", Ocean Engineering, Vol. 218, pp. 108173.1-33, 2020.12.15
Sung-Jun Lee, Myung-Il Roh, Min-Jae Oh, "Image-based Ship Detection Using Deep Learning", Ocean Systems Engineering, Vol. 10, No. 4, pp. 415-434, 2020.12.01
Ki-Su Kim, Myung-Il Roh, “ISO 15016:2015-based Method for Estimating the Fuel Oil Consumption of a Ship”, Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 791:1-18, 2020.10.12
Ki-Su Kim, June-Beom Lee, Myung-Il Roh, Ki-Min Han, Gap-Heon Lee, "Prediction of Ocean Weather Based on Denoising AutoEncoder and Convolutional LSTM", Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 805:1-24, 2020.10.14
Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01
Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01
Seung-Min Lee, Jong-Hyeok Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Hye-Won Lee, "An Optimization Model of Tugboat Operation for Conveying a Large Surface Vessel", Journal of Computational Design and Engineering, Vol. 8, No. 2, 2021.04.01
Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01
Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18
Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19
Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15