Skip to content
Extra Form
Abstract Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane.
Publication Date 2016-07-01
Role Corresponding Author
Category SCIE
Impact Factor 2.442

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01


List of Articles
번호 분류 제목 Publication Date
28 International Journal Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding", Advances In Engineering Software, Vol. 41, No. 4, pp. 656-665, 2010.04.01 file 2010-04-01
27 International Journal Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01 file 2020-12-01
26 International Journal John-Kyu Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Detailed Design and Construction of the Hull of an FPSO(Floating, Production, Storage, and Off-loading unit)", Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104, 2010.06.01 file 2010-06-01
25 International Journal John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modification of a Damaged Free-Fall Lifeboat for FPSO Through Free-Fall Tests”, International Journal of Offshore and Polar Engineering, Vol. 26, No. 4, pp. 417-422, 2016.12.01 file 2016-12-01
24 International Journal Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01 file 2021-06-01
23 International Journal Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01 file 2021-06-01
22 International Journal Jin-Hyeok Kim, Myung-Il Roh et al. "Prediction of the Superiority of the Hydrodynamic Performance of Hull Forms Using Deep Learning", accepted for publication in International Journal of Naval Architecture and Ocean Engineering, 2022.10.21 2022-10-21
21 International Journal Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01 file 2013-03-01
20 International Journal Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01 file 2012-03-01
19 International Journal Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01 file 2013-02-01
18 International Journal Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4 file 2016-08-01
17 International Journal Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01 file 2019-01-01
16 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15 file 2015-09-15
15 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01 file 2018-09-01
14 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01 file 2021-04-01
13 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01 file 2020-12-01
» International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01 file 2016-07-01
11 International Journal Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15 file 2021-08-15
10 International Journal Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01 file 2018-11-01
9 International Journal Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan) file 2021-09-03
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소