Skip to content
Extra Form
Abstract It is difficult to observe the potential risks of lifting or turn-over operations in the early stages before a real operation. Therefore, many dynamic simulations have been designed to predict the risks and to reduce the possibility of accidents. These simulations, however, have usually been performed for predetermined and fixed scenarios, so they do not reflect the real-time control of an operator that is one of the most important influential factors in an operation; additionally, lifting or turn-over operations should be a collaboration involving more than two operators. Therefore, this study presents an integrated method for a collaborative simulation that allows multiple workers to operate together in the virtual world. The proposed method is composed of four components. The first component is a dynamic analysis that is based on multibody-system dynamics. The second component is VR (virtual reality) for the generation of realistic views for the operators. The third component comprises the control devices and the scenario generator to handle the crane in the virtual environment. Lastly, the fourth component is the HLA (high-level architecture)-based integrated simulation interface for the convenient and efficient exchange of the data through the middleware. To show the applicability of the proposed method, it has been applied to a block turn-over simulation for which one floating crane and two crawler cranes were used, and an offshore module installation for which a DCR (dual-crane rig) was used. In conclusion, the execution of the proposed method of this study is successful regarding the above two applications for which multiple workers were involved.
Publication Date 2019-07-01
Role Corresponding Author
Category SCIE
Impact Factor 0.930

Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 2, pp. 699-722, 2019.07.01


  1. Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5

    CategoryInternational Journal
    Read More
  2. Seong-Hoon Kim, Myung-Il Roh, Min-Jae Oh, Sung-Woo Park, "Estimation of Ship Operational Efficiency from AIS Data Using Big Data Technology", IJNAOE, Vol. 12, pp. 440-453, 2020.05.21

    CategoryInternational Journal
    Read More
  3. Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01

    CategoryInternational Journal
    Read More
  4. Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01

    CategoryInternational Journal
    Read More
  5. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Detection and Response of Multibody Systems Using a Position Difference Method and Non-Interpenetration Constraint in Shipbuilding Simulation", Ocean Engineering, Vol. 195, pp. 1-18, 2020.01.01

    CategoryInternational Journal
    Read More
  6. Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01

    CategoryInternational Journal
    Read More
  7. Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

    CategoryInternational Journal
    Read More
  8. Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01

    CategoryInternational Journal
    Read More
  9. Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01

    CategoryInternational Journal
    Read More
  10. Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01

    CategoryInternational Journal
    Read More
  11. Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01

    CategoryInternational Journal
    Read More
  12. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

    CategoryInternational Journal
    Read More
  13. Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01

    CategoryInternational Journal
    Read More
  14. Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01

    CategoryInternational Journal
    Read More
  15. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01

    CategoryInternational Journal
    Read More
  16. Sung-Woo Park, Myung-Il Roh, Min-Jae Oh, Seong-Hoon Kim, "Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology", Journal of Ship Production and Design, Vol. 35, No. 3, pp. 220-230, 2019.08.01

    CategoryInternational Journal
    Read More
  17. Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01

    CategoryInternational Journal
    Read More
  18. Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01

    CategoryInternational Journal
    Read More
  19. Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23

    CategoryInternational Journal
    Read More
  20. Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소