Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
International Journal
2013.12.02 17:43
Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
조회 수 7580
첨부 '1' |
---|
Abstract | The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating, production, storage, and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses separated and pretreated natural gas into LNG. The volume of liquid occupies about 1/600 the volume of the natural gas. The cycles in the liquefaction process use seven main types of equipment: compressor, seawater cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study proposes a generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With a minimum amount of power required for the compressors, an optimized liquefaction cycle is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions was decreased by 7.45% compared with that of the DMR cycle. |
---|---|
Publication Date | 2013-03-01 |
Role | Corresponding Author |
Category | SCI |
Impact Factor | 2.237 |
-
Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19
CategoryInternational Journal -
Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23
CategoryInternational Journal -
Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "Method for Collision Avoidance Based on Deep Reinforcement Learning with Path-Speed Control for an Autonomous Ship", IJNAOE, Vol. 16, pp. 100579.1-19, 2023.12.22
CategoryInternational Journal -
Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15
CategoryInternational Journal -
Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15
CategoryInternational Journal -
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01
CategoryInternational Journal -
Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02
CategoryInternational Journal -
Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01
CategoryInternational Journal