Skip to content
Extra Form
Abstract The mooring system keeps the position of a floating body in the ocean under environmental loads. Mooring analysis should be performed based on the accurate mathematical model in order to predict the behaviors of the floating body and the mooring system. For this purpose, the finite element method (FEM)-based model has been widely used in recent years to model the mooring line numerically. However, existing studies were only applicable to a single floating body, and solved the equations of motion for the floating body and the mooring lines separately. For the application to a floating crane, which consists of several bodies connected to each other, the coupling effect due to the relative motion of each body should be taken into account. Therefore, in this study, the FEM-based mooring line model applicable to a multibody system is introduced based on flexible multibody dynamics. Then, to realize the interaction between the mooring line and the seabed, the non-interpenetration and slope constraints are suggested, and the friction model including sticking are adopted. For the verification of the suggested model, comparisons with the analytic solution and the commercial software are performed. Finally, the applications for a floating crane under various environmental loads are simulated. The results show that the suggested model can be properly adapted for mooring analysis.
Publication Date 2018-09-01
Role Corresponding Author
Category SCI
Impact Factor 1.894

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01


  1. Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19

    CategoryInternational Journal
    Read More
  2. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23

    CategoryInternational Journal
    Read More
  3. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "Method for Collision Avoidance Based on Deep Reinforcement Learning with Path-Speed Control for an Autonomous Ship", IJNAOE, Vol. 16, pp. 100579.1-19, 2023.12.22

    CategoryInternational Journal
    Read More
  4. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15

    CategoryInternational Journal
    Read More
  5. Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15

    CategoryInternational Journal
    Read More
  6. Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5

    CategoryInternational Journal
    Read More
  7. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16

    CategoryInternational Journal
    Read More
  8. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01

    CategoryInternational Journal
    Read More
  9. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01

    CategoryInternational Journal
    Read More
  10. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01

    CategoryInternational Journal
    Read More
  11. Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02

    CategoryInternational Journal
    Read More
  12. Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)

    CategoryInternational Journal
    Read More
  13. Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01

    CategoryInternational Journal
    Read More
  14. Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15

    CategoryInternational Journal
    Read More
  15. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

    CategoryInternational Journal
    Read More
  16. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01

    CategoryInternational Journal
    Read More
  17. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01

    CategoryInternational Journal
    Read More
  18. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01

    CategoryInternational Journal
    Read More
  19. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15

    CategoryInternational Journal
    Read More
  20. Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소