Skip to content
Extra Form
Abstract Recently, an OSV (Offshore Support Vessel) is being widely used to install an offshore structure such as a subsea equipment which is laid on its deck. The lifting operation which is one of installation operations includes lifting off, lifting in the air, splash zone crossing, deep submerging, and lastly landing of the structure with an OSV crane. There are some major considerations during this operation. Especially, when lifting off the structure, if operating conditions such as ocean environmental loads and hoisting (or lowering) speed are bad, the excess of tension of wire ropes of the crane and the collision between the OSV and the structure can be occurred due to the relative motion between them. To solve this problem, this study performs the lifting simulation while the OSV installs the structure. The simulation includes the calculation of dynamic responses of the OSV and the equipment, including the wire tension and the collision detection. To check the applicability of the simulation, it is applied to some lifting steps by varying operating conditions. As a result, it is confirmed that the conditions affect the operability of those steps.
Publication Date 2016-06-16
Role Corresponding Author
Category SCIE
Impact Factor 0.640

Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16


  1. Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01

    CategoryInternational Journal
    Read More
  2. John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modification of a Damaged Free-Fall Lifeboat for FPSO Through Free-Fall Tests”, International Journal of Offshore and Polar Engineering, Vol. 26, No. 4, pp. 417-422, 2016.12.01

    CategoryInternational Journal
    Read More
  3. Sol Ha, Seong-Ho Seo, Myung-Il Roh, Hyun-Kyoung Shin, "Simplified Nonlinear Model for the Weight Estimation of FPSO Plant Topside Using the Statistical Method", Ships and Offshore Structures, Vol. 11, No. 6, pp. 603-619, 2016.09.01

    CategoryInternational Journal
    Read More
  4. Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4

    CategoryInternational Journal
    Read More
  5. Ki-Su Kim, Myung-Il Roh, "A Submarine Arrangement Design Program Based on the Expert System and the Multistage Optimization", Advances In Engineering Software, Vol. 98, No. 97-111, 2016.08.01

    CategoryInternational Journal
    Read More
  6. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

    CategoryInternational Journal
    Read More
  7. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16

    CategoryInternational Journal
    Read More
  8. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Simulation of Load Lifting with Equalizers Used in Shipyards", Automation in Construction, Vol. 61, pp. 98-111, 2016.02.01

    CategoryInternational Journal
    Read More
  9. Sol Ha, Nam-Kug Ku, Myung-Il Roh, "Event-based Scenario Manager for Multibody Dynamics Simulation of Heavy Load Lifting Operations in Shipyards", International Journal of Naval Architecture and Ocean Engineering, Vol. 8, No. 1, pp. 83-101, 2016.01.01

    CategoryInternational Journal
    Read More
  10. Ki-Su Kim, Myung-Il Roh, Sol Ha, "Expert System Based on the Arrangement Evaluation Model for the Arrangement Design of a Submarine", Expert Systems with Applications, Vol. 42, No. 22, pp. 8731-8744, 2015.12.01

    CategoryInternational Journal
    Read More
  11. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Sol Ha, "Multibody Dynamic Analysis of a Heavy Load Suspended by a Floating Crane with Constraint-based Wire Rope", Ocean Engineering, Vol. 109, pp. 145-160, 2015.11.15

    CategoryInternational Journal
    Read More
  12. Nam-Kug Ku, Myung-Il Roh, "Dynamic Response Simulation of an Offshore Wind Turbine Suspended by a Floating Crane", Ships and Offshore Structures, Vol. 10, No. 6, pp. 621-634, 2015.11.01

    CategoryInternational Journal
    Read More
  13. Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01

    CategoryInternational Journal
    Read More
  14. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15

    CategoryInternational Journal
    Read More
  15. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01

    CategoryInternational Journal
    Read More
  16. Sol Ha, Nam-Kug Ku, Myung-Il Roh, Ho-Jin Hwang, "Multibody System Dynamics Simulator for Process Simulation of Ships and Offshore Plants in Shipyards", Advances In Engineering Software, Vol. 85, pp. 12-25, 2015.07.01

    CategoryInternational Journal
    Read More
  17. Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01

    CategoryInternational Journal
    Read More
  18. Tae-Sub Um, Myung-Il Roh, "Optimal Dimension Design of a Hatch Cover for Lightening a Bulk Carrier", International Journal of Naval Architecture and Ocean Engineering, Vol. 7, No. 2, pp. 270-287, 2015.03.01

    CategoryInternational Journal
    Read More
  19. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Design of Controller for Mobile Robot in Welding Process of Shipbuilding Engineering", Journal of Computational Design and Engineering, Vol. 1, No. 4, pp. 243-255, 2014.10.01

    CategoryInternational Journal
    Read More
  20. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소