# Publication

International Journal
2016.03.24 11:09

# Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

조회 수 322
?

#### 단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

#### 단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
Abstract Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane. 2016-07-01 Corresponding Author SCIE 2.442

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

 제목+내용제목내용댓글이름닉네임아이디태그
1. ### Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, Vol. 37, No. 14-15, pp. 1273-1291, 2010.10.01

CategoryInternational Journal
2. ### Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding", Advances In Engineering Software, Vol. 41, No. 4, pp. 656-665, 2010.04.01

CategoryInternational Journal
3. ### Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01

CategoryInternational Journal
4. ### John-Kyu Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Detailed Design and Construction of the Hull of an FPSO(Floating, Production, Storage, and Off-loading unit)", Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104, 2010.06.01

CategoryInternational Journal
5. ### John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modification of a Damaged Free-Fall Lifeboat for FPSO Through Free-Fall Tests”, International Journal of Offshore and Polar Engineering, Vol. 26, No. 4, pp. 417-422, 2016.12.01

CategoryInternational Journal
6. ### Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01

CategoryInternational Journal
7. ### Jisang Ha, Myung-Il Roh, Ki-Su Kim, Jin-Hyeok Kim, "Method for Pipe Routing Using the Expert System and the Heuristic Pathfinding Algorithm in Shipbuilding", International Journal of Naval Architecture and Ocean Engineering, 2023.05.26

CategoryInternational Journal
8. ### Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01

CategoryInternational Journal
9. ### Jin-Hyeok Kim, Myung-Il Roh, In-Chang Yeo, "Hull Form Optimization of Fully Parameterized Small Ships Using Characteristic Curves and Deep Neural Networks", International Journal of Naval Architecture and Ocean Engineering, 2024.05.08

CategoryInternational Journal
10. ### Jin-Hyeok Kim, Myung-Il Roh et al., "Prediction of the Superiority of the Hydrodynamic Performance of Hull Forms Using Deep Learning", International Journal of Naval Architecture and Ocean Engineering, Vol. 49, pp. 100490.1-15, pp. 2022.11.01

CategoryInternational Journal
11. ### Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01

CategoryInternational Journal
12. ### Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01

CategoryInternational Journal
13. ### Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01

CategoryInternational Journal
14. ### Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4

CategoryInternational Journal
15. ### Jeong-Ho Park, Myung-Il Roh, Hye-Won Lee, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, "Multi-vessel Target Tracking with Camera Fusion for Unmanned Surface Vehicles", International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.07.14

CategoryInternational Journal
16. ### In-Chang Yeo, Myung-Il Roh, Do-Hyun Chun, Seok Ho Jang, Jae Won Heo, "Optimal Arrangement Design of Pipeline Support by Considering Safety and Production Cost", International Journal of Naval Architecture and Ocean Engineering, 2023.05.10

CategoryInternational Journal
17. ### Hyun-Soo Kim, Myung-Il Roh, “Interpretable, Data-driven Models for Predicting Shaft Power, Fuel Consumption, and Speed Considering the Effects of Hull Fouling and Weather Conditions”, IJNAOE, 2024.04.14

CategoryInternational Journal
18. ### Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01

CategoryInternational Journal
19. ### Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01

CategoryInternational Journal
20. ### Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15

CategoryInternational Journal
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

## This Category

sketchbook5, 스케치북5

sketchbook5, 스케치북5

### 나눔글꼴 설치 안내

#### 이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소