Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
International Journal
2013.12.02 17:43
Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
조회 수 7912
첨부 '1' |
---|
Abstract | The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating, production, storage, and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses separated and pretreated natural gas into LNG. The volume of liquid occupies about 1/600 the volume of the natural gas. The cycles in the liquefaction process use seven main types of equipment: compressor, seawater cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study proposes a generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With a minimum amount of power required for the compressors, an optimized liquefaction cycle is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions was decreased by 7.45% compared with that of the DMR cycle. |
---|---|
Publication Date | 2013-03-01 |
Role | Corresponding Author |
Category | SCI |
Impact Factor | 2.237 |
-
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Simulation Framework for the Process Planning of Ships and Offshore Structures", Robotics and Computer-Integrated Manufacturing Journal, Vol, 26, No. 5, pp. 430-453, 2010.10.01
CategoryInternational Journal -
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, Vol. 37, No. 14-15, pp. 1273-1291, 2010.10.01
CategoryInternational Journal -
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding", Advances In Engineering Software, Vol. 41, No. 4, pp. 656-665, 2010.04.01
CategoryInternational Journal -
Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01
CategoryInternational Journal -
John-Kyu Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Detailed Design and Construction of the Hull of an FPSO(Floating, Production, Storage, and Off-loading unit)", Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104, 2010.06.01
CategoryInternational Journal -
John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modification of a Damaged Free-Fall Lifeboat for FPSO Through Free-Fall Tests”, International Journal of Offshore and Polar Engineering, Vol. 26, No. 4, pp. 417-422, 2016.12.01
CategoryInternational Journal -
Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01
CategoryInternational Journal -
Jisang Ha, Myung-Il Roh, Ki-Su Kim, Jin-Hyeok Kim, "Method for Pipe Routing Using the Expert System and the Heuristic Pathfinding Algorithm in Shipbuilding", International Journal of Naval Architecture and Ocean Engineering, 2023.05.26
CategoryInternational Journal -
Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01
CategoryInternational Journal -
Jisang Ha, Myung-Il Roh, Hye-Won Lee, "Ship Route Planning for Collision Avoidance Based on the Improved Isochrone Method", International Journal of Naval Architecture and Ocean Engineering, 2024.08.14
CategoryInternational Journal -
Jin-Hyeok Kim, Myung-Il Roh, In-Chang Yeo, "Hull Form Optimization of Fully Parameterized Small Ships Using Characteristic Curves and Deep Neural Networks", International Journal of Naval Architecture and Ocean Engineering, 2024.05.08
CategoryInternational Journal -
Jin-Hyeok Kim, Myung-Il Roh et al., "Prediction of the Superiority of the Hydrodynamic Performance of Hull Forms Using Deep Learning", International Journal of Naval Architecture and Ocean Engineering, Vol. 49, pp. 100490.1-15, pp. 2022.11.01
CategoryInternational Journal -
Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
CategoryInternational Journal -
Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01
CategoryInternational Journal -
Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01
CategoryInternational Journal -
Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4
CategoryInternational Journal -
Jeong-Ho Park, Myung-Il Roh, Hye-Won Lee, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, "Multi-vessel Target Tracking with Camera Fusion for Unmanned Surface Vehicles", International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.07.14
CategoryInternational Journal -
In-Chang Yeo, Myung-Il Roh, Do-Hyun Chun, Seok Ho Jang, Jae Won Heo, "Optimal Arrangement Design of Pipeline Support by Considering Safety and Production Cost", International Journal of Naval Architecture and Ocean Engineering, 2023.05.10
CategoryInternational Journal -
Hyun-Soo Kim, Myung-Il Roh, “Interpretable, Data-driven Models for Predicting Shaft Power, Fuel Consumption, and Speed Considering the Effects of Hull Fouling and Weather Conditions”, IJNAOE, 2024.04.14
CategoryInternational Journal -
Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01
CategoryInternational Journal