Skip to content
Extra Form
Abstract When a ship is damaged at sea, it is important to predict its behavior as well as whether it is to sink or not. If the ship comes to an equilibrium, the equilibrium position and time should be estimated; otherwise, the time to sink should be estimated. Furthermore, flooding analysis should be carried out not only during the design stage of the ship for preventive reasons, but also after an accident for a better investigation of its causes. In addition, flooding analysis methods that can provide predictions in case of an accident are of particular importance, as there is no time for the required calculations in an emergency. For this purpose, a quasi-static flooding analysis method for the damaged ship in the time domain is proposed in this study. There are a number of studies in which the equilibrium position and time were estimated by flooding analysis. However, most of them have not considered the air pressure effect in fully flooded compartments, and the method of determining the fluid volume in these compartments was not accurate. In the present study, the virtual vent and accumulator method are used to calculate the reference pressure in the fully flooded compartments, and the compartment shape is considered by using polyhedral integration. Also, spilled oil and solid cargo items from the damaged ship are taken into account for realistic flooding analysis. Finally, the damage stability criteria were checked not only in the final state, but also during the entire time of the flooding, as the intermediate states can be more hazardous than the final state. To validate the feasibility of the proposed method, it was applied to a naval ship, which is considerably more stringent for damage stability. As a result, we checked the availability of this study.
Publication Date 2022-02-10
Role Corresponding Author
Category SCIE
Impact Factor 0.940

Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, Vol. 38, No. 1, pp. 39-59, 2022.02.10

https://doi.org/10.5957/JSPD.10180037


List of Articles
번호 분류 제목 Publication Date
114 International Journal Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19 file 2021-05-19
113 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23 file 2022-07-23
112 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "Method for Collision Avoidance Based on Deep Reinforcement Learning with Path-Speed Control for an Autonomous Ship", IJNAOE, Vol. 16, pp. 100579.1-19, 2023.12.22 file 2023-12-22
111 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15 file 2021-08-15
110 International Journal Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15 file 2023-11-15
109 International Journal Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5 file 2020-05-16
108 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16 file 2016-06-16
107 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01 file 2017-07-01
106 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01 file 2017-09-01
105 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01 file 2015-09-01
104 International Journal Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02 file 2024-02-02
103 International Journal Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan) file 2021-09-03
102 International Journal Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01 file 2018-11-01
101 International Journal Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15 file 2021-08-15
100 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01 file 2016-07-01
99 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01 file 2020-12-01
98 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01 file 2021-04-01
97 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01 file 2018-09-01
96 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15 file 2015-09-15
95 International Journal Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01 file 2023-08-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소