Skip to content
Extra Form
Abstract The active heave compensation (AHC) system on an offshore supply vessel (OSV) plays a pivotal role in offshore installation operations by minimizing the heave motion of suspended subsea equipment, regardless of the OSV motion. In order to successfully perform its function, the AHC system should have a suitable control algorithm, and its performance must be evaluated in advance of operation. Performance analysis of the AHC system requires complicated testing procedures, and a great deal of associated equipment. In particular, such analysis is often very costly and time-consuming, and realistic conditions are typically impossible to establish in a testing environment. To solve this problem, the Hardware-In-the-Loop Simulation (HILS) concept can be used as an effective method to test an AHC system prior to its final installation. In this study, we have constructed the HILS environment for an AHC system for an OSV, and conducted a performance analysis of the AHC system. To do so, a virtual model of the OSV was first created from a multibody system that can represent realistic motion in waves. Then, a controller of the AHC system with a control algorithm for heave compensation was implemented on real hardware. Next, an integrated simulation interface was implemented to efficiently connect the virtual model and the controller, and a visualization model was developed to verify simulation results by immersive and realistic views. Finally, a performance analysis of the AHC system was conducted within the proposed HILS environment. A numerical example is a deadweight 3,500 ton OSV to install a subsea manifold in regular and irregular waves. A comparative study between uncontrolled and controlled results of the AHC system was further performed. As a result, the performance of the AHC system could be evaluated effectively within the HILS environment.
Publication Date 2018-10-01
Role Corresponding Author
Category SCIE
Impact Factor 0.298

Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5, pp. 678-691, 2018.10.01


List of Articles
번호 분류 제목 Publication Date
94 International Journal Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, Vol. 37, No. 14-15, pp. 1273-1291, 2010.10.01 file 2010-10-01
93 International Journal Ju-Hwan Cha, Seung-Ho Ham, Kyu-Yeul Lee, Myung-Il Roh, "Application of a Topological Modelling Approach of Multi-body System Dynamics to Simulation of Multi-floating Cranes in Shipyards", Journal of Multi-body Dynamics, Vol. 224, No. 4, pp. 365-373, 2010.12.01 file 2010-12-01
92 International Journal Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01 file 2011-06-01
91 International Journal Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01 file 2012-02-01
90 International Journal Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01 file 2012-03-01
89 International Journal Sol Ha, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Implementation of the Submarine Diving Simulation in a Distributed Environment", International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, pp. 211-227, 2012.09.01 file 2012-09-01
88 International Journal Sol Ha, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Cell-Based Evacuation Simulation Considering Human Behavior in a Passenger Ship", Ocean Engineering, Vol. 53, pp. 138-152, 2012.10.01 file 2012-10-01
87 International Journal Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01 file 2012-12-01
86 International Journal Myung-Il Roh, Sol Ha, "Advanced Ship Evacuation Analysis Using a Cell-Based Simulation Model", Computers In Industry, Vol. 64, No. 1, pp. 80-89, 2013.01.01 file 2013-01-01
85 International Journal Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01 file 2013-02-01
84 International Journal Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01 file 2013-03-01
83 International Journal Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01 file 2013-06-01
82 International Journal Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01 file 2013-11-01
81 International Journal Nam-Kug Ku, Ji-Hyun Hwang, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Module Layout for a Generic Offshore LNG Liquefaction Process of LNG-FPSO", Ships and Offshore Structures, Vol. 9, No. 3, pp. 311-332, 2014.05.01 file 2014-05-01
80 International Journal Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01 file 2014-06-01
79 International Journal Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Design of Controller for Mobile Robot in Welding Process of Shipbuilding Engineering", Journal of Computational Design and Engineering, Vol. 1, No. 4, pp. 243-255, 2014.10.01 file 2014-10-01
78 International Journal Tae-Sub Um, Myung-Il Roh, "Optimal Dimension Design of a Hatch Cover for Lightening a Bulk Carrier", International Journal of Naval Architecture and Ocean Engineering, Vol. 7, No. 2, pp. 270-287, 2015.03.01 file 2015-03-01
77 International Journal Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01 file 2015-06-01
76 International Journal Sol Ha, Nam-Kug Ku, Myung-Il Roh, Ho-Jin Hwang, "Multibody System Dynamics Simulator for Process Simulation of Ships and Offshore Plants in Shipyards", Advances In Engineering Software, Vol. 85, pp. 12-25, 2015.07.01 file 2015-07-01
75 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01 file 2015-09-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소