Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16
International Journal
2016.05.24 09:15
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16
조회 수 1370
| 첨부 '1' |
|---|
| Abstract | Recently, an OSV (Offshore Support Vessel) is being widely used to install an offshore structure such as a subsea equipment which is laid on its deck. The lifting operation which is one of installation operations includes lifting off, lifting in the air, splash zone crossing, deep submerging, and lastly landing of the structure with an OSV crane. There are some major considerations during this operation. Especially, when lifting off the structure, if operating conditions such as ocean environmental loads and hoisting (or lowering) speed are bad, the excess of tension of wire ropes of the crane and the collision between the OSV and the structure can be occurred due to the relative motion between them. To solve this problem, this study performs the lifting simulation while the OSV installs the structure. The simulation includes the calculation of dynamic responses of the OSV and the equipment, including the wire tension and the collision detection. To check the applicability of the simulation, it is applied to some lifting steps by varying operating conditions. As a result, it is confirmed that the conditions affect the operability of those steps. |
|---|---|
| Publication Date | 2016-06-16 |
| Role | Corresponding Author |
| Category | SCIE |
| Impact Factor | 0.640 |
-
Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4
-
Jeong-Ho Park, Myung-Il Roh, Hye-Won Lee, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, "Multi-vessel Target Tracking with Camera Fusion for Unmanned Surface Vehicles", International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.07.14
-
In-Su Han, Myung-Il Roh, Min-Chul Kong, “An Automated Method for Converting P&IDs in Shipbuilding to Structured Graphs”, accepted for publication in International Journal of Naval Architecture and Ocean Engineering, 2025.10.02
-
In-Su Han, Myung-Il Roh, Min-Chul Kong, Seoyoon Park, Jeongyoul Lee, "Search Method for Ship Regulations Based on Semantic Similarity Using Natural Language Processing", accepted for publication in Ships and Offshore Structures, 2025.04.29
-
In-Chang Yeo, Myung-Il Roh, Dong-Guen Jeong, Jun-Sik Lee, "A Route Planning Method for Small Ships Inside the Marina", International Journal of Naval Architecture and Ocean Engineering, Vol. 17, pp. 100684.1-16, 2025.08.13
-
In-Chang Yeo, Myung-Il Roh, Do-Hyun Chun, Seok Ho Jang, Jae Won Heo, "Optimal Arrangement Design of Pipeline Support by Considering Safety and Production Cost", International Journal of Naval Architecture and Ocean Engineering, 2023.05.10
-
Hyun-Soo Kim, Myung-Il Roh, “Interpretable, Data-driven Models for Predicting Shaft Power, Fuel Consumption, and Speed Considering the Effects of Hull Fouling and Weather Conditions”, IJNAOE, 2024.04.14
-
Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01
-
Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
-
Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15
-
Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01
-
Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)
-
Ha-Yun Kim, Myung-Il Roh, Hye-Won Lee, In-Chang Yeo, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, “A Hybrid Tracking Method for Maritime Obstacles Using Sensor Data”, Ocean Engineering, Vol. 312, Part 2, 2024.09.16
-
Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02
-
Dong-Woo Kim, Myung-Il Roh, Do-Hyun Chun, Sun-Hong Woo, Yong-Tai Kim, “A Method for the Profile Optimization of the Primary Barrier of a Membrane-type LNG Tank Using Surrogate Modeling”, Ocean Engineering, Vol. 317, 2025.02.01
