Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, "Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost", Journal of Marine Science and Engineering, Vol. 8, No. 5, pp. 353:1-15, 2020.05.16
Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5
| 첨부 '1' |
|---|
| Abstract | Thermal insulation panels are installed on the inner walls of liquefied natural gas (LNG) tanks of an LNG carrier to maintain the cryogenic temperature. Mastic ropes are used to attach thermal insulation panels to the inner walls and to fill the gap between the walls and panels. Because the inner walls of the LNG tanks can be corrugated owing to production errors, a large amount of mastic ropes are required to maintain the flatness of the thermal insulation panels. Therefore, in this study, an optimization method is proposed to minimize the total amount of mastic ropes for satisfying the flatness criterion of thermal insulation panels. For this purpose, an optimization problem is mathematically formulated. An objective function is used to minimize the total amount of mastic ropes considering constraints to flatten the thermal insulation panels. This function is applied to the design of membrane-type LNG tanks to verify the effectiveness and feasibility of the proposed method. Consequently, we confirm that the proposed method can provide a more effective arrangement design of mastic ropes compared with manual design. |
|---|---|
| Publication Date | 2020-05-16 |
| Role | Corresponding Author |
| Category | SCIE |
| Impact Factor | 2.033 |
-
Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01
-
Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4
-
Jeong-Ho Park, Myung-Il Roh, Hye-Won Lee, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, "Multi-vessel Target Tracking with Camera Fusion for Unmanned Surface Vehicles", International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.07.14
-
In-Su Han, Myung-Il Roh, Min-Chul Kong, “An Automated Method for Converting P&IDs in Shipbuilding to Structured Graphs”, International Journal of Naval Architecture and Ocean Engineering, Vol. 17, pp. 100696.1-20, 2025.10.04
-
In-Su Han, Myung-Il Roh, Min-Chul Kong, Seoyoon Park, Jeongyoul Lee, "Search Method for Ship Regulations Based on Semantic Similarity Using Natural Language Processing", Ships and Offshore Structures, 2025.05.12
-
In-Su Han, Myung-Il Roh, Min-Chul Kong, "A RAG-based Q&A System for Ship Regulations Applying Domain Adaptation", International Journal of Naval Architecture and Ocean Engineering, Vol. 18, pp. 100735.1-18, 2025.12.23
-
In-Chang Yeo, Myung-Il Roh, Yun-Sik Kim, Ha-Yun Kim, Do-Hyeok Ahn, Nam-Sun Son, "A Localization Method of Nearby Ships Based on 3D Object Detection Using a Camera", International Journal of Naval Architecture and Ocean Engineering, 2025.11.12
-
In-Chang Yeo, Myung-Il Roh, Dong-Guen Jeong, Jun-Sik Lee, "A Route Planning Method for Small Ships Inside the Marina", International Journal of Naval Architecture and Ocean Engineering, Vol. 17, pp. 100684.1-16, 2025.08.13
-
In-Chang Yeo, Myung-Il Roh, Do-Hyun Chun, Seok Ho Jang, Jae Won Heo, "Optimal Arrangement Design of Pipeline Support by Considering Safety and Production Cost", International Journal of Naval Architecture and Ocean Engineering, 2023.05.10
-
Hyun-Soo Kim, Myung-Il Roh, “Interpretable, Data-driven Models for Predicting Shaft Power, Fuel Consumption, and Speed Considering the Effects of Hull Fouling and Weather Conditions”, IJNAOE, 2024.04.14
-
Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01
-
Hyun Soo Kim, Myung-Il Roh, "Data-driven Model for Predicting Tank Pressure of an LNG Carrier Considering Environmental Effects", International Journal of Naval Architecture and Ocean Engineering, Vo.l. 18, 2026.01.01
-
Hye-Won Lee, Myung-Il Roh, Yeong-Min Cho, Jeong-Ho Park, "Data Association for Autonomous Ships Based on the Virtual Simulation Environment", Ocean Engineering, Vol. 281, pp. 114646.1-17, 2023.08.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of the Wireline Riser Tensioner System for a Mobile Offshore Drilling Unit Based on Multibody System Dynamics", Ocean Engineering, Vol. 106, pp. 485-495, 2015.09.15
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01
-
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
-
Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15
-
Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01
