Skip to content
Extra Form
Abstract The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating, production, storage, and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses separated and pretreated natural gas into LNG. The volume of liquid occupies about 1/600 the volume of the natural gas. The cycles in the liquefaction process use seven main types of equipment: compressor, seawater cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study proposes a generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With a minimum amount of power required for the compressors, an optimized liquefaction cycle is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions was decreased by 7.45% compared with that of the DMR cycle.
Publication Date 2013-03-01
Role Corresponding Author
Category SCI
Impact Factor 2.237

Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01


List of Articles
번호 분류 제목 Publication Date
54 International Journal Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, "Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane", Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01 file 2017-10-01
53 International Journal Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01 file 2017-10-01
52 International Journal Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01 file 2017-09-01
51 International Journal Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, Han-Sung Kim, Hyunsik Ahn, "Weight-estimation Method of FPSO Topsides Considering the Work Breakdown Structure", Journal of Offshore Mechanics and Arctic Engineering, Vol. 40, No. 1, pp. 1-10, 2018.02.01 file 2018-02-01
50 International Journal Seung-Ho Ham, Myung-Il Roh, Ju-Sung Kim, "Numerical Analysis of Wreck Removal Based on Multibody System Dynamics", Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 521-535, 2018.09.01 file 2018-09-01
49 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01 file 2018-06-01
48 International Journal Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01 file 2018-07-01
47 International Journal Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23 file 2018-02-23
46 International Journal Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01 file 2018-06-01
45 International Journal Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01 file 2018-11-01
44 International Journal Sung-Woo Park, Myung-Il Roh, Min-Jae Oh, Seong-Hoon Kim, "Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology", Journal of Ship Production and Design, Vol. 35, No. 3, pp. 220-230, 2019.08.01 file 2019-08-01
43 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01 file 2018-09-01
42 International Journal Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01 file 2019-01-01
41 International Journal Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01 file 2018-11-01
40 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5 file 2018-10-01
39 International Journal Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01 file 2018-12-01
38 International Journal Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01 file 2018-12-01
37 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01 file 2019-01-01
36 International Journal Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01 file 2019-07-01
35 International Journal Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01 file 2019-08-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소