Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01
International Journal
2015.08.11 15:12
Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01
조회 수 299
첨부 '1' |
---|
Abstract | The weight information of an FPSO (floating production, storage, and offloading) plant is one of the important data needed to estimate the amount of production material (e.g., plates) needed and to determine the suitable production method for its construction. In addition, the weight information is a key factor that affects the building cost and the production period of the FPSO plant. Although the importance of the weight has long been recognised, the weight, especially of the topside, has been roughly estimated using the existing similar data as well as the designer’s experience. To improve this task, a weight estimation model for FPSO plant topsides was developed in this study using the improved genetic programming (GP) method. For this reason, various past records on the estimation of the weight of the FPSO plant were collected through a literature survey, and then the weight estimation model using GP was established by fixing the independent variables based on these data. In addition, correlation analysis was performed to make up for the weak points of genetic programing, which is apt for inducing overfitting when the number of data is relatively smaller than that of the independent variables. That is, by reducing the number of variables through the analysis of the correlation between the independent variables, an increase in the number of weight data can be expected. Finally, to evaluate the applicability of the suggested model, it was applied to an example of the weight estimation of the FPSO plant topside. Compared with the results of the multiple nonlinear regression analysis that was conducted in the previous study, the results showed that the suggested model can be applied to the weight estimation process of the FPSO plant at the early design stage. |
---|---|
Publication Date | 2017-01-01 |
Role | Corresponding Author |
Category | SCIE |
Impact Factor | 0.790 |
Prev Ju-Sung Kim, Myung-Il Roh, Seung-Ho Ham, “A Method for Interm...
Ju-Sung Kim, Myung-Il Roh, Seung-Ho Ham, “A Method for Interm...
2016.10.08by SyDLab
John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modificati... Next
John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modificati...
2016.08.24by SyDLab
-
Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01
CategoryInternational Journal -
Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01
CategoryInternational Journal -
Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01
CategoryInternational Journal -
Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting", Journal of Ship Production and Design, Vol. 34, No. 2, pp. 119-133, 2018.05.01
CategoryInternational Journal -
Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23
CategoryInternational Journal -
Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, Han-Sung Kim, Hyunsik Ahn, "Weight-estimation Method of FPSO Topsides Considering the Work Breakdown Structure", Journal of Offshore Mechanics and Arctic Engineering, Vol. 40, No. 1, pp. 1-10, 2018.02.01
CategoryInternational Journal -
Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, "Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane", Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01
CategoryInternational Journal -
Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01
CategoryInternational Journal -
Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01
CategoryInternational Journal -
Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Arrangement Method of Offshore Topside Based on an Expert System and Optimization Technique”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 2, pp. 1-19, 2017.04.01
CategoryInternational Journal -
Seong-Hoon Kim, Myung-Il Roh, Ki-Su Kim, Min-Jae Oh, “Big Data Platform Based on Hadoop and Application to Weight Estimation of FPSO Topside”, Journal of Advanced Research in Ocean Engineering, Vol. 3, No. 1, pp. 32-40, 2017.03.01
CategoryInternational Journal -
Sung-Kyoon Kim, Myung-Il Roh, Ki-Su Kim, “Evaluation of Feasibility Index in the Arrangement Design of an Offshore Topside based on the Automatic Transformation of Experts’ Knowledge and the Fuzzy Logic”, Ocean Engineering, Vol. 130, 2017.01.15
CategoryInternational Journal -
Ju-Sung Kim, Myung-Il Roh, Seung-Ho Ham, “A Method for Intermediate Flooding and Sinking Simulation of a Damaged Floater in Time Domain”, Journal of Computational Design and Engineering, Vol. 4, No. 1, pp. 1-13, 2017.01.01
CategoryInternational Journal -
Sol Ha, Tae-Sub Um, Myung-Il Roh, Hyun-Kyoung Shin, “A Structural Weight Estimation Model of FPSO Topsides Using an Improved Genetic Programming Method”, Ships and Offshore Structures, Vol. 12, No. 1, pp. 43-55, 2017.01.01
CategoryInternational Journal -
John-Kyu Hwang, Myung-Il Roh, Ju-Hwan Cha, “Design Modification of a Damaged Free-Fall Lifeboat for FPSO Through Free-Fall Tests”, International Journal of Offshore and Polar Engineering, Vol. 26, No. 4, pp. 417-422, 2016.12.01
CategoryInternational Journal -
Sol Ha, Seong-Ho Seo, Myung-Il Roh, Hyun-Kyoung Shin, "Simplified Nonlinear Model for the Weight Estimation of FPSO Plant Topside Using the Statistical Method", Ships and Offshore Structures, Vol. 11, No. 6, pp. 603-619, 2016.09.01
CategoryInternational Journal -
Jeong-Woo Hong, Myung-Il Roh, Seung-Ho Ham, Sol Ha, "Dynamic Simulation of Subsea Equipment Installation Using an Offshore Support Vessel Based on Flexible Multibody System Dynamics", Journal of Marine Science and Technology (Taiwan), Vol. 24, No. 4
CategoryInternational Journal -
Ki-Su Kim, Myung-Il Roh, "A Submarine Arrangement Design Program Based on the Expert System and the Multistage Optimization", Advances In Engineering Software, Vol. 98, No. 97-111, 2016.08.01
CategoryInternational Journal -
Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01
CategoryInternational Journal