Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

SyDLab

조회 수 7354

Atachment
첨부 '1'	AIES(200607).pdf,

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄

단축키

Prev이전 문서

Next다음 문서

가 크게 작게 위로 아래로 댓글로 가기 인쇄

Extra Form
Abstract	At the initial stage of ship design, it is difficult for designers to define all design information of a hull structure on 2D drawings. Thus, other designers must undertake the arduous task of translating such information to generate a 3D CAD model of the hull structure which is required at the following design stage such as the initial process planning stage. Since this task needs much time and effort, the 3D CAD model is not being generated at the initial design stage. For solving this problem, an initial hull structural modeling system is developed in this study. The applicability of the developed system is demonstrated by applying it to a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). The results show that the developed system can quickly generate the 3D CAD model of the hull structure and accurately extract the production material information for computer-aided process planning at the initial design stage.
Publication Date	2006-07-01
Role	First Author
Category	SCIE
Impact Factor	1.673

Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

Prev Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System f... Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System f... 2013.12.02by Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling... Next Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling... 2013.12.02by

위로 아래로 댓글로 가기 인쇄

Category

Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

CategoryInternational Journal

Read More
Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

CategoryInternational Journal

Read More
Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

CategoryInternational Journal

Read More
Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01

CategoryInternational Journal

Read More
Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

CategoryInternational Journal

Read More
Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

CategoryInternational Journal

Read More
Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

CategoryInternational Journal

Read More
Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

CategoryInternational Journal

Read More
Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01

CategoryInternational Journal

Read More
Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01

CategoryInternational Journal

Read More
Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01

CategoryInternational Journal

Read More
Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18

CategoryInternational Journal

Read More
Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15

CategoryInternational Journal

Read More
Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Ho-Gyun Park, Jong-Oh Kim, "Variable Indexing Method in Rule Documents for Ship Design Using Extraction of PDF Elements", Journal of Computational Design and Engineering, Vol. 9, No. 6, 2022.11.16

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01

CategoryInternational Journal

Read More
Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01

CategoryInternational Journal

Read More

이메일 로그인

Publication

Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

단축키

단축키

Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01

Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01

Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01

Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01

Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18

Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15

Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Ho-Gyun Park, Jong-Oh Kim, "Variable Indexing Method in Rule Documents for Ship Design Using Extraction of PDF Elements", Journal of Computational Design and Engineering, Vol. 9, No. 6, 2022.11.16

Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01

Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01

Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01

Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01

This Category

나눔글꼴 설치 안내

이 PC에는 나눔글꼴이 설치되어 있지 않습니다.