Skip to content
Extra Form
Abstract Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane.
Publication Date 2016-07-01
Role Corresponding Author
Category SCIE
Impact Factor 2.442

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01


  1. Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19

    CategoryInternational Journal
    Read More
  2. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", Journal of Computational Design and Engineering, Vol. 9, No. 4, pp. 1430- 1448, 2022.07.23

    CategoryInternational Journal
    Read More
  3. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Donghun Yu, "Method for Collision Avoidance Based on Deep Reinforcement Learning with Path-Speed Control for an Autonomous Ship", IJNAOE, Vol. 16, pp. 100579.1-19, 2023.12.22

    CategoryInternational Journal
    Read More
  4. Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15

    CategoryInternational Journal
    Read More
  5. Do-Hyun Chun, Myung-Il Roh, In-Chang Yeo, Hye-Won Lee, “Proposed Method for Design Optimization of LNG Tanks Based on the Arrangement of Thermal Insulation Panels”, Ocean Engineering, Vol. 288, Part 2, pp. 116063.1-14, 2023.11.15

    CategoryInternational Journal
    Read More
  6. Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5

    CategoryInternational Journal
    Read More
  7. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Simulation of an Offshore Supply Vessel Considering Various Operating Conditions", Advances in Mechanical Engineering, Vol. 8, No. 6, pp. 1-13, 2016.06.16

    CategoryInternational Journal
    Read More
  8. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, Chan-Young Lee, “Performance Analyses of Naval Ships Based on Engineering Level of Simulation at the Initial Design Stage”, IJNAOE, Vol. 9, No. 4, pp. 446-459, 2017.07.01

    CategoryInternational Journal
    Read More
  9. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, “Case Study of Detection and Maneuvering Performance of Naval Ships Using Engagement Simulation of Engineering Level”, Ocean Systems Engineering, Vol. 7, No. 3, pp. 247-273, 2017.09.01

    CategoryInternational Journal
    Read More
  10. Dong-Hoon Jeong, Myung-Il Roh, Seung-Ho Ham, "Lifting Off Simulation of an Offshore Supply Vessel Considering Ocean Environmental Loads and Lifting Off Velocity", Ocean Systems Engineering, Vol. 5, No. 3, pp. 181-198, 2015.09.01

    CategoryInternational Journal
    Read More
  11. Dong-Woo Kim, Myung-Il Roh, Do-Hyun Chun, Sun-Hong Woo, Yong-Tai Kim, “A Method for the Profile Optimization of the Primary Barrier of a Membrane-type LNG Tank Using Surrogate Modeling”, accepted for publication in Ocean Engineering, 2024.12.06

    CategoryInternational Journal
    Read More
  12. Donghun Yu, Myung-Il Roh, “Method for Anti-collision Path Planning Using Velocity Obstacle and A* Algorithms for a Maritime Autonomous Surface Ship”, International Journal of Naval Architecture and Ocean Engineering, Vol. 16, 2024.02.02

    CategoryInternational Journal
    Read More
  13. Ha-Yun Kim, Myung-Il Roh, Hye-Won Lee, In-Chang Yeo, Yeong-Min Jo, Jisang Ha, Nam-Sun Son, “A Hybrid Tracking Method for Maritime Obstacles Using Sensor Data”, Ocean Engineering, Vol. 312, Part 2, 2024.09.16

    CategoryInternational Journal
    Read More
  14. Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)

    CategoryInternational Journal
    Read More
  15. Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01

    CategoryInternational Journal
    Read More
  16. Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15

    CategoryInternational Journal
    Read More
  17. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

    CategoryInternational Journal
    Read More
  18. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01

    CategoryInternational Journal
    Read More
  19. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01

    CategoryInternational Journal
    Read More
  20. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 7 Next
/ 7

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소