Skip to content
Extra Form
Abstract The active heave compensation (AHC) system on an offshore supply vessel (OSV) plays a pivotal role in offshore installation operations by minimizing the heave motion of suspended subsea equipment, regardless of the OSV motion. In order to successfully perform its function, the AHC system should have a suitable control algorithm, and its performance must be evaluated in advance of operation. Performance analysis of the AHC system requires complicated testing procedures, and a great deal of associated equipment. In particular, such analysis is often very costly and time-consuming, and realistic conditions are typically impossible to establish in a testing environment. To solve this problem, the Hardware-In-the-Loop Simulation (HILS) concept can be used as an effective method to test an AHC system prior to its final installation. In this study, we have constructed the HILS environment for an AHC system for an OSV, and conducted a performance analysis of the AHC system. To do so, a virtual model of the OSV was first created from a multibody system that can represent realistic motion in waves. Then, a controller of the AHC system with a control algorithm for heave compensation was implemented on real hardware. Next, an integrated simulation interface was implemented to efficiently connect the virtual model and the controller, and a visualization model was developed to verify simulation results by immersive and realistic views. Finally, a performance analysis of the AHC system was conducted within the proposed HILS environment. A numerical example is a deadweight 3,500 ton OSV to install a subsea manifold in regular and irregular waves. A comparative study between uncontrolled and controlled results of the AHC system was further performed. As a result, the performance of the AHC system could be evaluated effectively within the HILS environment.
Publication Date 2018-10-01
Role Corresponding Author
Category SCIE
Impact Factor 0.298

Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5, pp. 678-691, 2018.10.01


  1. Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan)

    CategoryInternational Journal
    Read More
  2. Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01

    CategoryInternational Journal
    Read More
  3. Ki-Su Kim, June-Beom Lee, Myung-Il Roh, Ki-Min Han, Gap-Heon Lee, "Prediction of Ocean Weather Based on Denoising AutoEncoder and Convolutional LSTM", Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 805:1-24, 2020.10.14

    CategoryInternational Journal
    Read More
  4. Ki-Su Kim, Myung-Il Roh, “ISO 15016:2015-based Method for Estimating the Fuel Oil Consumption of a Ship”, Journal of Marine Science and Engineering, Vol. 8, No. 10, pp. 791:1-18, 2020.10.12

    CategoryInternational Journal
    Read More
  5. Sung-Jun Lee, Myung-Il Roh, Min-Jae Oh, "Image-based Ship Detection Using Deep Learning", Ocean Systems Engineering, Vol. 10, No. 4, pp. 415-434, 2020.12.01

    CategoryInternational Journal
    Read More
  6. Ki-Su Kim, Myung-Il Roh, "Dynamic Flooding Analysis Method for Intermediate Flooding Process of a Ship", Ocean Engineering, Vol. 218, pp. 108173.1-33, 2020.12.15

    CategoryInternational Journal
    Read More
  7. Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01

    CategoryInternational Journal
    Read More
  8. Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01

    CategoryInternational Journal
    Read More
  9. Do-Hyun Chun, Myung-Il Roh, Seung-Ho Ham, “Optimum Arrangement Design of Mastic Ropes for Membrane-type LNG Tanks Considering the Flatness of Thermal Insulation Panel and Production Cost”, Journal of Marine Science and Engineering, Vol. 8, No. 5

    CategoryInternational Journal
    Read More
  10. Seong-Hoon Kim, Myung-Il Roh, Min-Jae Oh, Sung-Woo Park, "Estimation of Ship Operational Efficiency from AIS Data Using Big Data Technology", IJNAOE, Vol. 12, pp. 440-453, 2020.05.21

    CategoryInternational Journal
    Read More
  11. Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01

    CategoryInternational Journal
    Read More
  12. Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01

    CategoryInternational Journal
    Read More
  13. Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Detection and Response of Multibody Systems Using a Position Difference Method and Non-Interpenetration Constraint in Shipbuilding Simulation", Ocean Engineering, Vol. 195, pp. 1-18, 2020.01.01

    CategoryInternational Journal
    Read More
  14. Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01

    CategoryInternational Journal
    Read More
  15. Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01

    CategoryInternational Journal
    Read More
  16. Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01

    CategoryInternational Journal
    Read More
  17. Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01

    CategoryInternational Journal
    Read More
  18. Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01

    CategoryInternational Journal
    Read More
  19. Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01

    CategoryInternational Journal
    Read More
  20. Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소