# Publication

International Journal
2016.03.24 11:09

# Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

조회 수 166
?

#### 단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

#### 단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
Abstract Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane. 2016-07-01 Corresponding Author SCIE 2.442

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01

 제목+내용제목내용댓글이름닉네임아이디태그
List of Articles
번호 분류 제목 Publication Date
68 International Journal Kyu-Yeul Lee, Myung-Il Roh, "A Hybrid Optimization Method for Multidisciplinary Ship Design", Journal of Ship Technology Research, Vol. 47, No. 4, pp. 181-185, 2000.10.01 2000-10-01
67 International Journal Kyu-Yeul Lee, Myung-Il Roh, "An Efficient Genetic Algorithm Using Gradient Information for Ship Structural Design Optimization", Journal of Ship Technology Research, Vol. 48, No. 4, pp. 161-170, 2001.11.01 2001-11-01
66 International Journal Kyu-Yeul Lee, Myung-Il Roh, Hyuk-Su Jeong, "An Improved Genetic Algorithm for Multi-Floor Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 32, No. 4, pp. 879-899, 2005.04.01 2005-04-01
65 International Journal Kyu-Yeul Lee, Myung-Il Roh, Seonho Cho, "Multidisciplinary Design Optimization of Mechanical Systems Using Collaborative Optimization Approach", International Journal of Vehicle Design, Vol. 25, No. 4, pp. 353-368, 2001.11.01 2001-11-01
64 International Journal Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "An Improved Genetic Algorithm for Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 30, No. 1, pp. 117-138, 2003.01.01 2003-01-01
63 International Journal Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "Optimal Compartment Layout Design for a Naval Ship Using an Improved Genetic Algorithm", Marine Technology and SNAME News, Vol. 39, No. 3, pp. 159-169, 2002.07.01 2002-07-01
62 International Journal Kyu-Yeul Lee, Seonho Cho, Myung-Il Roh, "An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis", International Journal of Vehicle Design, Vol. 28, No. 4, pp. 300-317, 2002.07.01 2002-07-01
61 International Journal Kyu-Yeul Lee, Won-Joon Lee, Myung-Il Roh, "Development of a Semantic Product Modeling System for Initial Hull Structure in Shipbuilding", Robotics and Computer-Integrated Manufacturing Journal, Vol. 20, No. 3, pp. 211-223, 2004.06.01 2004-06-01
60 International Journal Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01 2019-11-01
59 International Journal Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01 2015-06-01
58 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01 2018-06-01
57 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5 2018-10-01
56 International Journal Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01 2019-08-01
55 International Journal Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01 2015-10-01
54 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Ho-Gyun Park, Jong-Oh Kim, "Variable Indexing Method in Rule Documents for Ship Design Using Extraction of PDF Elements", accepted for publication in Journal of Computational Design and Engineering, 2022.11.11 2022-11-11
53 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15 2022-02-15
52 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18 2021-04-18
51 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01 2019-01-01
50 International Journal Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01 2018-11-01
49 International Journal Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01 2018-12-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

## This Category

sketchbook5, 스케치북5

sketchbook5, 스케치북5

### 나눔글꼴 설치 안내

#### 이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소