Skip to content
Extra Form
Abstract The motion of a semisubmersible drilling rig must be checked in advance to satisfy the safety criteria of the rig. However, the complexity of the rig’s connections makes it difficult to analyze the rig motion during the drilling operation because it is connected to the seabed by the blow-out preventer (BOP). The rig’s connections consist of several pieces of risers, a telescopic joint, and a riser tensioner system. Also, from a macroscopic perspective, the risers should be regarded as flexible threads. Therefore, this study developed a rig motion analysis program considering the deformable effects of flexible risers and the full connectivity of the drilling rig. Flexible multibody dynamics (FMBD) based on the absolute nodal coordinate formulation (ANCF) is adapted for the mathematical modeling of the risers and joints. Acting as an external disturbance, a hydrodynamic force and current force are exerted on the drilling rig and the risers, respectively. The drilling rig is fully modeled including the riser tensioner system, telescopic joint, flexible risers, and upper and lower flex joints. The motion analysis with and without connections was fulfilled to verify the effect of connectivity. Moreover, we observed that the movement of the drilling rig increases as the current speed increases. Finally, the simulation is successfully applied to check the motions and tensions of the drilling rig in moderate and storm conditions.
Publication Date 2017-10-01
Role Corresponding Author
Category SCIE
Impact Factor 0.993

Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, Vol. 139, No. 5, pp. 1-10, 2017.10.01


List of Articles
번호 분류 제목 Publication Date
66 International Journal Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01 file 2010-06-01
65 International Journal Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01 file 2007-10-01
64 International Journal Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01 file 2007-08-01
63 International Journal Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01 file 2006-04-01
62 International Journal Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01 file 2006-07-01
61 International Journal Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01 file 2011-06-01
60 International Journal Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01 file 2013-06-01
59 International Journal Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01 file 2012-12-01
58 International Journal Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01 file 2018-12-01
57 International Journal Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01 file 2018-11-01
56 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01 file 2019-01-01
55 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18 file 2021-04-18
54 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15 file 2022-02-15
53 International Journal Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01 file 2015-10-01
52 International Journal Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01 file 2019-08-01
51 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5 file 2018-10-01
50 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01 file 2018-06-01
49 International Journal Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01 file 2015-06-01
48 International Journal Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01 file 2019-11-01
47 International Journal Kyu-Yeul Lee, Won-Joon Lee, Myung-Il Roh, "Development of a Semantic Product Modeling System for Initial Hull Structure in Shipbuilding", Robotics and Computer-Integrated Manufacturing Journal, Vol. 20, No. 3, pp. 211-223, 2004.06.01 file 2004-06-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소