Skip to content
Extra Form
Abstract One of the most commonly used pieces of equipment for lifting a load is the equalizer of a crane in shipbuilding production. The equalizer distributes the tension in wire ropes between the load and equipment equally. While the equalizer is composed simply of several fixed and moving pulleys, themechanismof an equalizer is not easy to adapt to physics-based simulations because only onewire rope is coiled around all of the pulleys. Thus, instead of the real mechanism of the equalizer, an alternative mechanism, such as stretching or shortening the initial lengths of the wire ropes, logically, has been used in previous simulations. In this study, a mass-less constraint-based wire rope is adopted to realize the real mechanism of the equalizer. The constant length constraint is used to realize one wire rope among the fixed and moving equalizer pulleys. We derive a discrete Euler–Lagrange (DEL) equation to represent the motion of a multibody system including the constraint wire ropes. The DEL equation is shown to be numerically stable for the case of linear holonomic constraints, such as the constant length constraint. Wetest several series of fixed and moving pulleys andmodel the equalizer based on the real mechanism. Finally, the equalizer based on the real mechanism is applied to two typical lifting cases in shipbuilding production. One is lifting a load using a Goliath cranewith three equalizers and the other is to use a floating cranewith one equalizer and two crawler cranes. As a result, the tensions in the wire ropes connected to the load are adjusted equally as the position of the moving pulleys and the orientation of the equalizer change.
Publication Date 2016-02-01
Role Corresponding Author
Category SCIE
Impact Factor 2.442

Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Simulation of Load Lifting with Equalizers Used in Shipyards", Automation in Construction, Vol. 61, pp. 98-111, 2016.02.01


List of Articles
번호 분류 제목 Publication Date
66 International Journal Kyu-Yeul Lee, Myung-Il Roh, "An Efficient Genetic Algorithm Using Gradient Information for Ship Structural Design Optimization", Journal of Ship Technology Research, Vol. 48, No. 4, pp. 161-170, 2001.11.01 file 2001-11-01
65 International Journal Kyu-Yeul Lee, Myung-Il Roh, Hyuk-Su Jeong, "An Improved Genetic Algorithm for Multi-Floor Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 32, No. 4, pp. 879-899, 2005.04.01 file 2005-04-01
64 International Journal Kyu-Yeul Lee, Myung-Il Roh, Seonho Cho, "Multidisciplinary Design Optimization of Mechanical Systems Using Collaborative Optimization Approach", International Journal of Vehicle Design, Vol. 25, No. 4, pp. 353-368, 2001.11.01 file 2001-11-01
63 International Journal Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "An Improved Genetic Algorithm for Facility Layout Problems Having Inner Structure Walls and Passages", Computers & Operations Research, Vol. 30, No. 1, pp. 117-138, 2003.01.01 file 2003-01-01
62 International Journal Kyu-Yeul Lee, Seong-Nam Han, Myung-Il Roh, "Optimal Compartment Layout Design for a Naval Ship Using an Improved Genetic Algorithm", Marine Technology and SNAME News, Vol. 39, No. 3, pp. 159-169, 2002.07.01 file 2002-07-01
61 International Journal Kyu-Yeul Lee, Seonho Cho, Myung-Il Roh, "An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis", International Journal of Vehicle Design, Vol. 28, No. 4, pp. 300-317, 2002.07.01 file 2002-07-01
60 International Journal Kyu-Yeul Lee, Won-Joon Lee, Myung-Il Roh, "Development of a Semantic Product Modeling System for Initial Hull Structure in Shipbuilding", Robotics and Computer-Integrated Manufacturing Journal, Vol. 20, No. 3, pp. 211-223, 2004.06.01 file 2004-06-01
59 International Journal Luman Zhao, Myung-Il Roh, "COLREGs-Compliant Multiship Collision Avoidance Based on Deep Reinforcement Learning", Ocean Engineering, Vol. 191, pp. 1-15, 2019.11.01 file 2019-11-01
58 International Journal Luman Zhao, Myung-Il Roh, Jeong-Woo Hong, "Optimal Thrust Allocation for Dynamic Positioning of Deep-sea Working Vessel", Journal of Advanced Research in Ocean Engineering, Vol. 1, No. 2, pp. 94-105, 2015.06.01 file 2015-06-01
57 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01 file 2018-06-01
56 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5 file 2018-10-01
55 International Journal Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01 file 2019-08-01
54 International Journal Luman Zhao, Myung-Il Roh, “A Thrust Allocation Method for Efficient Dynamic Positioning of a Semisubmersible Drilling Rig Based on the Hybrid Optimization Algorithm”, Mathematical Problems in Engineering, Vol. 2015, pp. 1-12, 2015.10.01 file 2015-10-01
53 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15 file 2022-02-15
52 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18 file 2021-04-18
51 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01 file 2019-01-01
50 International Journal Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01 file 2018-11-01
49 International Journal Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01 file 2018-12-01
48 International Journal Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01 file 2012-12-01
47 International Journal Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01 file 2013-06-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소