Skip to content
Extra Form
Abstract To increase the lifting capacity and minimize the cost and time for building a ship and offshore structure, block lifting with multi-cranes becomes more and more danger. In this paper, therefore, dynamic response analysis of the multi-cranes is performed for block lifting operation. By this simulation, one can confirm the dynamic effects, such as dynamic motion and load, to prevent fatal accidents during the multi-crane operation. The crane system consists of several bodies. These bodies are connected with various types of joints and wire rope. To carry out the dynamic simulation, therefore, the crane system is modeled as a multi-body system. There are several types of crane, such as a goliath crane, jib crane, and floating crane, etc. Among them, the floating crane is operated on the sea water. Therefore the hydrostatic force and linearized hydrodynamic force are considered as the external forces acting on the floating crane. Using the dynamics simulation program developed in this paper, a dynamic response simulation of several cases of block lifting with multi-cranes are carried out, and the simulation results are validated by comparing them with the measured data from the shipyard. Moreover, the simulation results can be applied to the structural analysis for evaluate the dynamic effects on the block.
Publication Date 2014-06-01
Role Coauthor
Category Others

Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01


  1. Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

    CategoryInternational Journal
    Read More
  2. Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

    CategoryInternational Journal
    Read More
  3. Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

    CategoryInternational Journal
    Read More
  4. Myung-Il Roh, Kyu-Yeul Lee, "An Initial Hull Structural Modeling System for Computer-Aided Process Planning in Shipbuilding", Advances In Engineering Software, Vol. 37, No. 7, pp. 457-476, 2006.07.01

    CategoryInternational Journal
    Read More
  5. Myung-Il Roh, Kyu-Yeul Lee, "Development of a 3D CAD System for Modeling Hull Structure at the Initial Ship Design Stage", Ships and Offshore Structures, Vol. 1, No. 2, pp. 135-151, 2006.04.01

    CategoryInternational Journal
    Read More
  6. Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

    CategoryInternational Journal
    Read More
  7. Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

    CategoryInternational Journal
    Read More
  8. Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

    CategoryInternational Journal
    Read More
  9. Myung-Il Roh, Kyu-Yeul Lee, Seong-Jin Yoo, "An Algorithm for Generating the Hull Structural Analysis Model Using the Seam Information of the Hull Structure at the Initial Design Stage", Journal of Ship and Ocean Technology, Vol. 10, No. 4, pp. 24-33, 2006.12.01

    CategoryInternational Journal
    Read More
  10. Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, "Rapid Generation of the Piping Model Having the Relationship with a Hull Structure in Shipbuilding", Advances In Engineering Software, Vol. 38, No. 4, pp. 215-228, 2007.04.01

    CategoryInternational Journal
    Read More
  11. Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, Seong-Jin Yoo, "Improvement of Ship Design Practice Using a 3D CAD Model of a Hull Structure", Robotics and Computer-Integrated Manufacturing Journal, Vol. 24, No. 1, pp. 105-124, 2008.02.01

    CategoryInternational Journal
    Read More
  12. Myung-Il Roh, Sol Ha, "Advanced Ship Evacuation Analysis Using a Cell-Based Simulation Model", Computers In Industry, Vol. 64, No. 1, pp. 80-89, 2013.01.01

    CategoryInternational Journal
    Read More
  13. Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01

    CategoryInternational Journal
    Read More
  14. Nam-Kug Ku, Ji-Hyun Hwang, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Module Layout for a Generic Offshore LNG Liquefaction Process of LNG-FPSO", Ships and Offshore Structures, Vol. 9, No. 3, pp. 311-332, 2014.05.01

    CategoryInternational Journal
    Read More
  15. Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01

    CategoryInternational Journal
    Read More
  16. Nam-Kug Ku, Myung-Il Roh, "Dynamic Response Simulation of an Offshore Wind Turbine Suspended by a Floating Crane", Ships and Offshore Structures, Vol. 10, No. 6, pp. 621-634, 2015.11.01

    CategoryInternational Journal
    Read More
  17. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01

    CategoryInternational Journal
    Read More
  18. Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Design of Controller for Mobile Robot in Welding Process of Shipbuilding Engineering", Journal of Computational Design and Engineering, Vol. 1, No. 4, pp. 243-255, 2014.10.01

    CategoryInternational Journal
    Read More
  19. Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01

    CategoryInternational Journal
    Read More
  20. Sang-Uk Lee, Myung-Il Roh, Ju-Hwan Cha, Kyu-Yeul Lee, "Ship Compartment Modeling Based On a Non-manifold Polyhedron Modeling Kernel", Advances In Engineering Software, Vol. 40, No. 5, pp. 378-388, 2009.05.01

    CategoryInternational Journal
    Read More
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소