Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
첨부 '1' |
---|
Abstract | The liquefaction process is regarded as primary among all topside systems in liquefied natural gas floating, production, storage, and offloading (LNG FPSO) applications. The liquefaction process, which typically accounts for 70% of the capital cost of topside process systems and 30 to 40% of the overall cost of LNG FPSO plants, condenses separated and pretreated natural gas into LNG. The volume of liquid occupies about 1/600 the volume of the natural gas. The cycles in the liquefaction process use seven main types of equipment: compressor, seawater cooler, expansion valve, heat exchanger, phase separator, tee, and common header. Different types of liquefaction cycles are determined according to their respective synthesis and optimized operating conditions. This study proposes a generic liquefaction model to represent various types of liquefaction cycles. Twenty-seven feasible liquefaction configurations derived from the generic model are selected to perform the most effective synthesis for the optimization of the liquefaction cycle. With a minimum amount of power required for the compressors, an optimized liquefaction cycle is proposed by obtaining optimal operating conditions in 27 cases. The optimized liquefaction cycle is compared with the dual mixed refrigerant (DMR) cycle for the application of LNG FPSO. Finally, the results show that the amount of power required for the operating conditions was decreased by 7.45% compared with that of the DMR cycle. |
---|---|
Publication Date | 2013-03-01 |
Role | Corresponding Author |
Category | SCI |
Impact Factor | 2.237 |
-
Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01
-
Nam-Kug Ku, Ji-Hyun Hwang, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Module Layout for a Generic Offshore LNG Liquefaction Process of LNG-FPSO", Ships and Offshore Structures, Vol. 9, No. 3, pp. 311-332, 2014.05.01
-
Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01
-
Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01
-
Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01
-
Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01
-
Myung-Il Roh, Sol Ha, "Advanced Ship Evacuation Analysis Using a Cell-Based Simulation Model", Computers In Industry, Vol. 64, No. 1, pp. 80-89, 2013.01.01
-
Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01
-
Sol Ha, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Cell-Based Evacuation Simulation Considering Human Behavior in a Passenger Ship", Ocean Engineering, Vol. 53, pp. 138-152, 2012.10.01
-
Sol Ha, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Implementation of the Submarine Diving Simulation in a Distributed Environment", International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, pp. 211-227, 2012.09.01
-
Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01
-
Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01
-
Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01
-
Ju-Hwan Cha, Seung-Ho Ham, Kyu-Yeul Lee, Myung-Il Roh, "Application of a Topological Modelling Approach of Multi-body System Dynamics to Simulation of Multi-floating Cranes in Shipyards", Journal of Multi-body Dynamics, Vol. 224, No. 4, pp. 365-373, 2010.12.01
-
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Simulation Framework for the Process Planning of Ships and Offshore Structures", Robotics and Computer-Integrated Manufacturing Journal, Vol, 26, No. 5, pp. 430-453, 2010.10.01
-
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, Vol. 37, No. 14-15, pp. 1273-1291, 2010.10.01
-
John-Kyu Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Detailed Design and Construction of the Hull of an FPSO(Floating, Production, Storage, and Off-loading unit)", Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104, 2010.06.01
-
Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01
-
Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding", Advances In Engineering Software, Vol. 41, No. 4, pp. 656-665, 2010.04.01
-
Sang-Uk Lee, Myung-Il Roh, Ju-Hwan Cha, Kyu-Yeul Lee, "Ship Compartment Modeling Based On a Non-manifold Polyhedron Modeling Kernel", Advances In Engineering Software, Vol. 40, No. 5, pp. 378-388, 2009.05.01