Skip to content
Extra Form
Abstract When a ship is damaged at sea, it is important to predict its behavior as well as whether it is to sink or not. If the ship comes to an equilibrium, the equilibrium position and time should be estimated; otherwise, the time to sink should be estimated. Furthermore, flooding analysis should be carried out not only during the design stage of the ship for preventive reasons, but also after an accident for a better investigation of its causes. In addition, flooding analysis methods that can provide predictions in case of an accident are of particular importance, as there is no time for the required calculations in an emergency. For this purpose, a quasi-static flooding analysis method for the damaged ship in the time domain is proposed in this study. There are a number of studies in which the equilibrium position and time were estimated by flooding analysis. However, most of them have not considered the air pressure effect in fully flooded compartments, and the method of determining the fluid volume in these compartments was not accurate. In the present study, the virtual vent and accumulator method are used to calculate the reference pressure in the fully flooded compartments, and the compartment shape is considered by using polyhedral integration. Also, spilled oil and solid cargo items from the damaged ship are taken into account for realistic flooding analysis. Finally, the damage stability criteria were checked not only in the final state, but also during the entire time of the flooding, as the intermediate states can be more hazardous than the final state. To validate the feasibility of the proposed method, it was applied to a naval ship, which is considerably more stringent for damage stability. As a result, we checked the availability of this study.
Publication Date 2022-02-10
Role Corresponding Author
Category SCIE
Impact Factor 0.940

Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, Vol. 38, No. 1, pp. 39-59, 2022.02.10


List of Articles
번호 분류 제목 Publication Date
46 International Journal Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, "Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane", Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01 file 2017-10-01
45 International Journal Seung-Ho Ham, Myung-Il Roh, Jung-Woo Hong, “Dynamic Effect of a Flexible Riser in a Fully Connected Semisubmersible Drilling Rig Using the Absolute Nodal Coordinate Formulation”, Journal of Offshore Mechanics and Arctic Engineering, 2017.10.01 file 2017-10-01
44 International Journal Ki-Su Kim, Myung-Il Roh, Sung-Min Lee, Han-Sung Kim, Hyunsik Ahn, "Weight-estimation Method of FPSO Topsides Considering the Work Breakdown Structure", Journal of Offshore Mechanics and Arctic Engineering, Vol. 40, No. 1, pp. 1-10, 2018.02.01 file 2018-02-01
43 International Journal Sun-Kyung Jung, Myung-Il Roh, Ki-Su Kim, "Arrangement Method of a Naval Surface Ship Considering Stability, Operability, and Survivability", Ocean Engineering, Vol. 152, pp. 316-333, 2018.02.23 file 2018-02-23
42 International Journal Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, "Optimum Design of Lug Arrangement Based on Static and Dynamic Analyses for Block Lifting", Journal of Ship Production and Design, Vol. 34, No. 2, pp. 119-133, 2018.05.01 file 2018-05-01
41 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Anti-Sway Control of the Crane on an Offshore Support Vessel Based on the Hardware-In-The-Loop Simulation", International Journal of Offshore and Polar Engineering, Vol. 28, No. 2, pp. 182-189, 2018.06.01 file 2018-06-01
40 International Journal Sung-Min Lee, Myung-Il Roh, Ki-Su Kim, Hoe-Ryong Jung, Jong-Jin Park, "Method for a Simultaneous Determination of the Path and the Speed for Ship Route Planning Problems", Ocean Engineering, Vol. 157, pp. 301-312, 2018.06.01 file 2018-06-01
39 International Journal Seung-Ho Ham, Myung-Il Roh, Luman Zhao, "Integrated Method of Analysis, Visualization, and Hardware for Ship Motion Simulation", Journal of Computational Design and Engineering, Vol. 5, No. 3, pp. 285-298, 2018.07.01 file 2018-07-01
38 International Journal Seung-Ho Ham, Myung-Il Roh, Ju-Sung Kim, "Numerical Analysis of Wreck Removal Based on Multibody System Dynamics", Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 521-535, 2018.09.01 file 2018-09-01
37 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, Nam-Kug Ku, "Coupled Analysis Method of a Mooring System and a Floating Crane Based on Flexible Multibody Dynamics Considering Contact with the Seabed", Ocean Engineering, Vol. 163, pp. 555-569, 2018.09.01 file 2018-09-01
36 International Journal Luman Zhao, Myung-Il Roh, Seung-Ho Ham, "Performance Analysis of an Active Heave Compensation System on an Offshore Supply Vessel Using the Hardware-In-The-Loop Simulation", Journal of Marine Science and Technology (Taiwan), Vol. 26, No. 5 file 2018-10-01
35 International Journal Min-Jae Oh, Myung-Il Roh, Tae-Wan Kim, "Local T-spline Surface Skinning with Shape Preservation", Computer-Aided Design, Vol. 104, pp. 15-26, 2018.11.01 file 2018-11-01
34 International Journal Hye-Won Lee, Myung-Il Roh, "Review of the Multibody Dynamics in the Applications of Ships and Offshore Structures", Ocean Engineering, Vol. 167, pp. 65-76, 2018.11.01 file 2018-11-01
33 International Journal Min-Jae Oh, Taw-Wan Kim, Myung-Il Roh, "G1 Bezier Surface Interpolation with T-junctions at a 3-Valent Singular Vertex", Computer Aided Geometric Design, Vol. 67, pp. 79-95, 2018.12.01 file 2018-12-01
32 International Journal Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01 file 2018-12-01
31 International Journal Hyun-Cheol Kim, Myung-Il Roh, Soon-Hung Han, "Passenger Evacuation Simulation of MV SEWOL Considering the Heeling Angle Change During Sinking", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 1, pp. 329-343, 2019.01.01 file 2019-01-01
30 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Se-Hyun Myung, "Big Data-based Piping Material Analysis Framework in Offshore Structure for Contract Design", Ocean Systems Engineering, Vol. 9, No. 1, pp. 79-95, 2019.01.01 file 2019-01-01
29 International Journal Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", IJNAOE, Vol. 11, No. 2, pp. 699-722, 2019.07.01 file 2019-07-01
28 International Journal Sung-Woo Park, Myung-Il Roh, Min-Jae Oh, Seong-Hoon Kim, "Association Analysis of Piping Materials of an Offshore Structure Using Big Data Technology", Journal of Ship Production and Design, Vol. 35, No. 3, pp. 220-230, 2019.08.01 file 2019-08-01
27 International Journal Luman Zhao, Myung-Il Roh, Sung-Jun Lee, "Control Method for Path Following and Collision Avoidance of Autonomous Ships Based on Deep Reinforcement Learning", Journal of Marine Science and Technology (Taiwan), Vol. 27, No. 4, pp. 293-310, 2019.08.01 file 2019-08-01
Board Pagination Prev 1 2 3 4 5 6 Next
/ 6

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소