Skip to content
Extra Form
Abstract The weight estimation and calculation of FPSO topsides is first performed at the bidding stage of projects. At this time, it is difficult to estimate and calculate accurately the weight because most of items of FPSO are not apparently defined. Especially, in the case of the pipe rack module, its portion of the total weight and the range of weight variation are large due to special features of piping and electric equipment in the module. Thus, it is very important to estimate and calculate accurately its weight in the task of the weight estimation and calculation of FPSO topsides. In this study, the past data for the weight of the pipe rack module were collected and analyzed, the WBS (Work Breakdown Structure) for the pipe rack module was constructed, and primary variables and secondary variables for developing a weight estimation and calculation model were selected. That is, after analyzing the past data, the volume was selected as the primary variable and the regression analysis was performed based on the variable. Then, several secondary variables were selected and incorporated into a weight estimation and calculation model. At this time, the weight per discipline was assumed from ratios of the total weight. Finally, the weight of the pipe rack module was estimated and calculated by using the developed model. As a result, the deviation from the model was better than that (-20% ~ 60 %) of other studies about the weight estimation and calculation of FPSO topsides. Thus, the validity and applicability of the weight estimation and calculation of the pipe rack could be checked.
Publication Date 2016-10-01
Role Corresponding Author
Category KCI

이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01


  1. 정세용, 노명일, 신현경, 하솔, 구남국, "최적화 기법을 이용한 부유식 해양 구조물의 배치 방법", 한국CAD/CAM학회 논문집, Vol. 18, No. 6, pp. 439-450, 2013.12.01

    CategoryDomestic Journal
    Read More
  2. 서성호, 노명일, 구남국, 신현경, "통계적 방법을 이용한 부유식 해양 플랜트의 중량 추정용 간이 모델 연구", 대한조선학회 논문집, Vol. 50, No. 6, pp.373-382, 2013.12.01

    CategoryDomestic Journal
    Read More
  3. 하솔, 구남국, 노명일, "DEVS 형식론 기반의 Dynamic Reliability Block Diagram과 GPU 가속 기술을 이용한 신뢰도 분석 방법", 한국시뮬레이션학회 논문지, Vol. 22, No. 4, pp. 109-118, 2013.12.01

    CategoryDomestic Journal
    Read More
  4. 김기수, 하솔, 구남국, 노명일, "잠수함 배치 설계에의 전문가 시스템 적용 방안에 대한 연구", 대한조선학회 논문집, Vol. 51, No. 2, pp. 138-147, 2014.04.01

    CategoryDomestic Journal
    Read More
  5. 엄태섭, 노명일, 신현경, 하솔, "유전적 프로그래밍 방법을 이용한 부유식 해양 구조물의 중량 추정 모델", 한국CAD/CAM학회 논문집, Vol. 19, No. 1, pp. 1-11, 2014.03.01

    CategoryDomestic Journal
    Read More
  6. 하솔, 구남국, 이규열, 노명일, "수중 운동체 교전 시뮬레이션을 위한 이산 사건 및 이산 시간 혼합형 시뮬레이션 모델 구조 기반의 전투 공간 모델 개발", 한국시뮬레이션학회 논문지, Vol. 22, No. 2, pp. 11-19, 2013.06.01

    CategoryDomestic Journal
    Read More
  7. 서성호, 노명일, 신현경, "비선형 회귀 분석을 이용한 부유식 해양 구조물의중량 추정 모델 연구", 대한조선학회 논문집, Vol. 51, No. 6, pp. 530-538, 2014.12.01

    CategoryDomestic Journal
    Read More
  8. 구남국, 노명일, 하솔, 신현경, "다물체계 운동 방정식 선형화를 통한 해상 풍력 발전기 동적 거동의 주파수 영역 해석 방법에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 20, No. 1, pp. 84-92, 2015.03.01

    CategoryDomestic Journal
    Read More
  9. 정세용, 노명일, 신현경, "최적화 기법을 이용한 부유식 해양 플랜트 상부 구조의 다층 배치 모델", 대한조선학회 논문집, Vol. 52, No. 1, pp. 77-87, 2015.02.01

    CategoryDomestic Journal
    Read More
  10. 엄태섭, 노명일, 신현경, "개선된 유전적 프로그래밍 방법을 이용한 부유식 해양 구조물의 중량 추정 모델 연구", 대한조선학회 논문집, Vol. 52, No. 1, pp. 1-7, 2015.02.01

    CategoryDomestic Journal
    Read More
  11. 함승호, 노명일, 김주성, 이혜원, 하솔, "환경 하중을 고려한 침몰 선체의 물리 기반 인양 시뮬레이션", 대한조선학회 논문집, Vol. 5, No. 5, pp. 387-394, 2015.10.01

    CategoryDomestic Journal
    Read More
  12. 김기수, 노명일, 김성용, 안진우, "잠수함의 구획 및 장비 배치 최적화를 위한 배치 템플릿 모델", 한국CAD/CAM학회 논문집, Vol. 21, No. 1, pp. 51-60, 2016.03.01

    CategoryDomestic Journal
    Read More
  13. 이수호, 안현식, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "해양 공사 EPC 견적용 중량 추산 방법에 관한 기초 연구", 대한조선학회 논문집, Vol. 53, No. 2, pp. 154-161, 2016.04.01

    CategoryDomestic Journal
    Read More
  14. 김성훈, 노명일, 김기수, "조선 해양 산업에서의 응용을 위한 하둡 기반의 빅데이터 플랫폼 연구", 한국CAD/CAM학회 논문집, Vol. 21, No. 3, pp. 334-340, 2016.09.01

    CategoryDomestic Journal
    Read More
  15. 이수호, 안현식, 김한성, 허윤, 배재류, 김기수, 함승호, 이성민, 노명일, "FPSO Topsides Pipe Rack 견적 중량 추산 방법 연구", 대한조선학회 논문집, Vol. 53, No. 5, pp. 362-370, 2016.10.01

    CategoryDomestic Journal
    Read More
  16. 이혜원, 노명일, 함승호, 조로만, 김낙완, 하솔, 우주현, 정우현, 유찬우, “무인수상정의 기뢰 탐지 임무 수행을 위한 통합 시뮬레이션 방법 연구”, 한국CDE학회 논문집, Vol. 22, No. 3, pp. 306-316, 2017.09.01

    CategoryDomestic Journal
    Read More
  17. 명세현, 노명일, 최형순, “조선 PLM을 위한 핵심 평가 지표 수립 방법론”, 한국CDE학회 논문집, Vol. 23, No. 1, pp. 60-67, 2018.03.01

    CategoryDomestic Journal
    Read More
  18. 오민재, 노명일, 박성우, 김성훈, “빅데이터 분석을 이용한 해양 구조물 배관 자재의 소요량 예측”, 대한조선학회 논문집, Vol. 55, No. 3, pp. 243-251, 2018.06.01

    CategoryDomestic Journal
    Read More
  19. 전도현, 노명일, 함승호, 이혜원, “블록의 탑재 안전성을 위한 초기 평형 자세 탐색 방법 연구”, 대한조선학회 논문집, Vol. 55, No. 4, pp. 297-305, 2018.08.01

    CategoryDomestic Journal
    Read More
  20. 조영인, 오민재, 석영수, 이성준, 노명일, “딥러닝을 이용한 선형 설계 초기 단계에서의 저항 추정”, 한국CDE학회 논문집, Vol. 24, No. 2, pp. 1-8, 2019.06.01

    CategoryDomestic Journal
    Read More
Board Pagination Prev 1 2 3 4 Next
/ 4

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소