Skip to content
Extra Form
Abstract Ship and offshore plants are constructed with cranes on the dock by joining several blocks, which are basic units for design and production in shipbuilding. In the joining process, the erection and turn‐over operation of a block can cause interference between the block and the wire ropes on the cranes. To identify such a possibility in advance, lifting simulation, which is a kind of dynamic simulation, can be used based on multibody system dynamics. At this time, it is necessary to calculate the contact forces exerted on the block because the block can be damaged or structurally deformed if the contact forces become larger than the allowable value. However, if the lifting simulation is performed with the traditional wire rope model modeled by an incompressible spring, it is difficult to check whether the block and the wire ropes interfere with each other, and to calculate the contact forces exerted, if any. To perform a realistic lifting simulation, a wire rope model that takes interference into consideration is adopted in this study. In addition, a contact algorithm that consists of four steps is proposed to check contacts and to calculate the contact forces. First, the Möller algorithm, which is generally known as the fastest algorithm for triangle-ray intersection, is applied to detect the contacts. Second, the contacted wire rope is divided to cope with the contacts. Third, the contact forces are calculated with the sum of the tensions in the wire rope segments including a contact point. To verify the efficiency and applicability of the proposed method, it is applied to block turnover simulation. It can be seen that the contacts can be accurately checked, and the corresponding contact forces can be calculated if there are contacts between the block and the wire ropes on the crane.
Publication Date 2016-07-01
Role Corresponding Author
Category SCIE
Impact Factor 2.442

Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Turnover Simulation Considering the Interferences between the Block and Wire Ropes in Shipbuilding", Automation in Construction, Vol. 67, pp. 60-75, 2016.07.01


List of Articles
번호 분류 제목 Publication Date
172 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, "Automation of Crane Control for Block Lifting Based on Deep Reinforcement Learning", accepted for publication in Journal of Computational Design and Engineering, 2022.07.11 2022-07-11
171 International Journal Min-Chul Kong, Myung-Il Roh, Ki-Su Kim, Jeongyoul Lee, Jongoh Kim, Gapheon Lee, "Object Detection Method for Ship Safety Plans Using Deep Learning", Ocean Engineering, 2022.02.15 file 2022-02-15
170 International Journal Ki-Su Kim, Myung-Il Roh, Seung-Min Lee, "Quasi-static Flooding Analysis Method of a Damaged Ship Considering Oil Spill and Cargo Load", Journal of Ship Production and Design, 2022.02.10 file 2022-02-10
169 International Journal Won-Jae Lee, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Yeong-Min Cho, Nam-Sun Son, “Detection and Tracking for the Awareness of Surroundings of a Ship Based on Deep Learning”, Journal of Computational Design and Engineering, Vo. 8, No. 5 file 2021-10-01
168 International Journal Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, et al., "Integrated Simulation of Virtual Prototypes and Control Algorithms of Unmanned Surface Vehicles Based on a Robot Operating System", Journal of Marine Science and Technology (Taiwan) file 2021-09-03
167 International Journal Do-Hyun Chun, Myung-Il Roh, Hye-Won Lee, Jisang Ha, Donghun Yu, “Deep Reinforcement Learning-based Collision Avoidance for an Autonomous Ship”, Ocean Engineering, Vol. 234, pp. 1-20, 2021.08.15 file 2021-08-15
166 International Journal Hye-Won Lee, Myung-Il Roh, Ki-Su Kim, “Ship Route Planning in Arctic Ocean Based on POLARIS”, Ocean Engineering, Vol. 234, pp. 109297.1-14, 2021.08.15 file 2021-08-15
165 International Journal June-Beom Lee, Myung-Il Roh, Ki-Su Kim, “Prediction of Ship Power Based on Variation in Deep Feed-forward Neural Network”, International Journal of Naval Architecture and Ocean Engineering, 2021.08.07 file 2021-08-12
164 International Journal Jisang Ha, Myung-Il Roh, Seung-Ho Ham, Sung-Jun Lee, “Optimum Design of the Underwater Discharge System Based on Surrogate Modeling”, Journal of Marine Science and Technology (Taiwan), Vol. 29, No. 3, pp. 338-353, 2021.06.01 file 2021-06-01
163 International Journal Jisang Ha, Myung-Il Roh, Hye-Won Lee, “Quantitative Calculation Method of the Collision Risk for Collision Avoidance in Ship Navigation Using the CPA and Ship Domain”, Journal of Computational Design and Engineering, Vol. 8, No. 3, 2021.06.01 file 2021-06-01
162 Domestic Journal 남권우, 노명일, 이혜원, 이원재, "자율 운항 선박을 위한 딥 러닝 기반 선박 이미지 분류 방법", 한국CDE학회 논문집, Vol. 26, No. 2, pp. 144-153, 2021.06.01 file 2021-06-01
161 International Journal Beom-Soo Kim, Min-Jae Oh, Jae-Hoon Lee, Yonghwan Kim, Myung-Il Roh, "Study on Hull Optimization Process Considering Operational Efficiency in Waves", Processes, Vol. 9, No. 5, pp. 898.1-21, 2021.05.19 file 2021-05-19
160 International Journal Min-Jae Oh, Myung-Il Roh, Sung-Woo Park, Do-Hyun Chun, Myeong-Jo Son, Jeong-Youl Lee, “Operational Analysis of Container Ships by Using Maritime Big Data”, Journal of Marine Science and Engineering, Vol. 9, No. 4, pp. 438: 1-21, 2021.04.18 file 2021-04-18
159 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Underactuated Crane Control for the Automation of Block Erection in Shipbuilding", Automation in Construction, Vol. 124, pp. 1-28, 2021.04.01 file 2021-04-01
158 International Journal Seung-Min Lee, Jong-Hyeok Lee, Myung-Il Roh, Ki-Su Kim, Seung-Ho Ham, Hye-Won Lee, "An Optimization Model of Tugboat Operation for Conveying a Large Surface Vessel", Journal of Computational Design and Engineering, Vol. 8, No. 2, 2021.04.01 file 2021-04-01
157 International Journal Seung-Ho Ham, Myung-Il Roh, “Time-domain Structural Analysis During Block Turnover and Lifting Using 2D Flexible Multibody Dynamics”, Marine Structures, Vol. 75, pp. 102841.1-26, 2021.01.01 file 2021-01-01
156 International Journal Ki-Su Kim, Myung-Il Roh, "Dynamic Flooding Analysis Method for Intermediate Flooding Process of a Ship", Ocean Engineering, Vol. 218, pp. 108173.1-33, 2020.12.15 file 2020-12-15
155 International Journal Joo-Pil Lee, Myung-Il Roh, Hye-Won Lee, Seung-Ho Ham, "Design of a Wreck Removal Method Considering Safety and Economy", Ships and Offshore Structures, Vol. 15, No. 10, pp. 1037-1056, 2020.12.01 file 2020-12-01
154 International Journal Hye-Won Lee, Myung-Il Roh, Seung-Ho Ham, "Block Erection Simulation Considering Frictional Contact with Wire Ropes", Ocean Engineering, Vol. 217, pp. 1-24, 2020.12.01 file 2020-12-01
153 International Journal Sung-Jun Lee, Myung-Il Roh, Min-Jae Oh, "Image-based Ship Detection Using Deep Learning", Ocean Systems Engineering, Vol. 10, No. 4, pp. 415-434, 2020.12.01 file 2020-12-01
Board Pagination Prev 1 2 3 4 5 6 7 8 9 Next
/ 9

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소