Skip to content
Extra Form
Abstract In the initial ship design stage of shipyards, the hull form design, the basic design (compartment modeling and ship calculation), and the hull structural design are being performed by different systems. Thus, the problem on interfaces between these systems occurs. To solve this, we developed the hull form design system “EzHULL” and the compartment modeling and ship calculation system "EzCOMPART" for developing finally an integrated ship design system. And, in this study, we present an object-oriented hull structural design system “EzSTRUCT”, which is developed recently. A structural design in an initial design stage can be frequently changed, because the design is not firmly determined yet. Therefore, designers perform the simplified structural modeling with bigger structural parts (or objects) such as deck, longitudinal bulkhead, etc. in the initial design stage, and the detailed structural modeling with smaller structural parts such as plate, seam, slot, etc. in the detailed design stage. However, the existing hull structural CAD system used in a shipyard is not efficient in generating a 3D CAD model in the initial design stage, because it has difficulty in handling frequent changes in design. Therefore, designers initially draw 2D drawings in the initial design stage, and generate the 3D CAD model from these 2D drawings in the detailed design and production design stages. In this study, the hull structural design system, which can efficiently generate a 3D CAD model through rapid modeling at an initial design stage, was developed in this study. To evaluate the applicability of the developed system, we applied it to hull structural modeling of various ships such as a VLCC, a bulk carrier, etc. As a result, it could efficiently generate a 3D CAD model of a hull structure.
Publication Date 2005-08-01
Role First Author
Category KCI

노명일, 이규열, "객체 지향 초기 선체 구조 설계 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 10, No. 4, pp. 244-253, 2005.08.01


  1. No Image 02Dec
    by
    in Domestic Journal

    노명일, 이규열, "초기 선체 구조 모델을 기반으로 한 선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션", 대한조선학회 논문집, Vol. 43, No. 1, pp. 103-118, 2006.02.01

  2. No Image 02Dec
    by SyDLab
    in Domestic Journal

    노명일, 이규열, "객체 지향 초기 선체 구조 설계 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 10, No. 4, pp. 244-253, 2005.08.01

  3. No Image 02Dec
    by
    in Domestic Journal

    이원준, 이규열, 노명일, 권오환, "의미론적 제품 데이터 모델 기반 초기 선체 구조 CAD 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 7, No. 3, pp. 157-169, 2002.09.01

  4. No Image 02Dec
    by
    in Domestic Journal

    한성남, 이규열, 노명일, "개선된 유전자 알고리즘을 이용한 최적 공간 배치 설계에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 6, No. 3, pp. 174-183, 2001.09.01

  5. No Image 02Dec
    by
    in Domestic Journal

    노명일, 이규열, "협동 최적화 접근 방법에 의한 다분야 최적 설계에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 5, No. 3, pp.263-275, 2000.09.01

  6. No Image 28Nov
    by
    in Domestic Journal

    구남국, 하솔, 노명일, "적응 제어 기반 Portable 용접 로봇 시뮬레이터 개발", 대한조선학회 논문집, 49권, 5호, pp. 400-409, 2012.10.

  7. No Image 28Nov
    by
    in Domestic Journal

    하솔, 조윤옥, 구남국, 이규열, 노명일, "손상 선박의 자세를 고려한 여객선 승객 탈출 시뮬레이션", 대한조선학회 논문집, Vol. 50, No. 3, pp. 175-181, 2013.06.01

Board Pagination Prev 1 2 3 4 Next
/ 4

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소