Skip to content
Extra Form
Abstract At the initial process planning and scheduling stage of a ship, the generation task of the production material information of a building block and the simulation task of the block erection have been manually performed using 2D drawings, etc. To make these tasks automatic, an accurate generation method for the production material information and a convenient simulation method for block erection using a 3D CAD model are developed in this study. For this, a 3D CAD model for a whole hull structure is generated first, and the block division method for dividing the 3D CAD model into a number of building blocks is then developed using the relationship between the hull structural parts. A generation method for the production material information for calculating the weight, etc., of a building block is developed. A simulation method for block erection is also developed using the composition and erection sequence information of erection blocks. Finally, to evaluate the developed methods, these methods are applied to corresponding processes of a deadweight 300 000-ton very large crude oil carrier. As a result, it is shown that the production material information can be accurately generated and the block erection can be conveniently simulated at the initial design stage.
Publication Date 2007-10-01
Role First Author
Category SCI

Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01


  1. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

  2. No Image 02Dec
    by
    in International Journal

    Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01

  3. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, "Determination of an Economical Shipping Route Considering the Effects of Sea State for Lower Fuel Consumption", International Journal of Naval Architecture and Ocean Engineering, Vol. 5, No. 2, pp. 246-262, 2013.06.01

  4. No Image 02Dec
    by
    in International Journal

    Ji-Hyun Hwang, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Design of Liquefaction Cycles of Liquefied Natural Gas", Industrial & Engineering Chemistry Research, Vol. 52, No. 15, pp. 5341-5356, 2013.03.01

  5. No Image 02Dec
    by
    in International Journal

    Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Determination of the Optimal Operating Condition of the Dual Mixed Refrigerant Cycle for the LNG FPSO Topside Liquefaction Process", Computers and Chemical Engineering, Vol. 49, pp. 25-36, 2013.02.01

  6. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, "Block Layout Method in the Block Stockyard Based on the Genetic Algorithm", Ocean Systems Engineering, Vol. 2, No. 4, pp. 271-287, 2012.12.01

  7. No Image 02Dec
    by
    in International Journal

    Sol Ha, Nam-Kug Ku, Myung-Il Roh, Kyu-Yeul Lee, "Cell-Based Evacuation Simulation Considering Human Behavior in a Passenger Ship", Ocean Engineering, Vol. 53, pp. 138-152, 2012.10.01

  8. No Image 02Dec
    by
    in International Journal

    Sol Ha, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Implementation of the Submarine Diving Simulation in a Distributed Environment", International Journal of Naval Architecture and Ocean Engineering, Vol. 4, No. 3, pp. 211-227, 2012.09.01

  9. No Image 02Dec
    by
    in International Journal

    Ji-Hyun Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Engineering Environment for the Process FEED of Offshore Oil and Gas Production Plants", Ocean Systems Engineering, Vol. 2, No. 1, pp. 49-68, 2012.03.01

  10. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Ju-Hwan Cha, "A Block Transportation Scheduling System Considering a Minimization of Travel Distance without Loading of and Interference between Multiple Transporters", International Journal of Production Research, Vol. 49, No. 11, pp. 3231-3250, 2011.06.01

  11. No Image 02Dec
    by
    in International Journal

    Ju-Hwan Cha, Seung-Ho Ham, Kyu-Yeul Lee, Myung-Il Roh, "Application of a Topological Modelling Approach of Multi-body System Dynamics to Simulation of Multi-floating Cranes in Shipyards", Journal of Multi-body Dynamics, Vol. 224, No. 4, pp. 365-373, 2010.12.01

  12. No Image 02Dec
    by
    in International Journal

    Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Dynamic Response Simulation of a Heavy Cargo Suspended by a Floating Crane Based on Multibody System Dynamics", Ocean Engineering, Vol. 37, No. 14-15, pp. 1273-1291, 2010.10.01

  13. No Image 02Dec
    by
    in International Journal

    Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Integrated Simulation Framework for the Process Planning of Ships and Offshore Structures", Robotics and Computer-Integrated Manufacturing Journal, Vol, 26, No. 5, pp. 430-453, 2010.10.01

  14. No Image 02Dec
    by
    in International Journal

    John-Kyu Hwang, Myung-Il Roh, Kyu-Yeul Lee, "Detailed Design and Construction of the Hull of an FPSO(Floating, Production, Storage, and Off-loading unit)", Ships and Offshore Structures, Vol. 5, No. 2, pp. 93-104, 2010.06.01

  15. No Image 02Dec
    by
    in International Journal

    Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "Combined Discrete Event and Discrete Time Simulation Framework and Its Application to the Block Erection Process in Shipbuilding", Advances In Engineering Software, Vol. 41, No. 4, pp. 656-665, 2010.04.01

  16. No Image 02Dec
    by
    in International Journal

    Sang-Uk Lee, Myung-Il Roh, Ju-Hwan Cha, Kyu-Yeul Lee, "Ship Compartment Modeling Based On a Non-manifold Polyhedron Modeling Kernel", Advances In Engineering Software, Vol. 40, No. 5, pp. 378-388, 2009.05.01

  17. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, Seong-Jin Yoo, "Improvement of Ship Design Practice Using a 3D CAD Model of a Hull Structure", Robotics and Computer-Integrated Manufacturing Journal, Vol. 24, No. 1, pp. 105-124, 2008.02.01

  18. No Image 02Dec
    by SyDLab
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

  19. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Generation of the 3D CAD Model of the Hull Structure at the Initial Ship Design Stage and Its Application", Computers in Industry, Vol. 58, No. 6, pp. 539-557, 2007.08.01

  20. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, "Rapid Generation of the Piping Model Having the Relationship with a Hull Structure in Shipbuilding", Advances In Engineering Software, Vol. 38, No. 4, pp. 215-228, 2007.04.01

Board Pagination Prev 1 ... 3 4 5 6 7 8 9 Next
/ 9

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소