Skip to content
Extra Form
Abstract One of the most important factors of wreck removal is the estimation of the total lifting force, because it is the basis of the decisions on the wreck removal plan and equipment selection. For this, the soil-resistant force that allows the wreck to escape from the seabed sediment should be calculated. After the wreck escapes from the seabed, the current force acts on it from the seabed to near the sea surface. If floating cranes are used, the dynamic effects due to the floating crane motion should be considered while lifting the wreck. In this study, numerical analysis of wreck removal based on multibody system dynamics is performed when the wreck is lifted by two floating cranes with the same lifting capacity. The total lifting force of the floating cranes is calculated according to various ocean environmental conditions. Three kinds of seabed sediments are used to calculate different soil-resistant forces. Hydrodynamic forces from regular waves with several wave amplitudes, periods, and heading angles are applied to the floating cranes to understand the effect of each condition. In addition, irregular waves are also considered to analyze the total lifting force, which are more realistic cases in the ocean. As a result, it is checked whether the total lifting forces obtained from numerical analysis exceed the criteria for safe operations.
Publication Date 2018-09-01
Role Corresponding Author
Category SCIE
Impact Factor 0.838

Seung-Ho Ham, Myung-Il Roh, Ju-Sung Kim, "Numerical Analysis of Wreck Removal Based on Multibody System Dynamics", Journal of Marine Science and Technology, Vol. 23, No. 3, pp. 521-535, 2018.09.01


  1. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Generation of the Production Material Information of a Building Block and Simulation of the Block Erection for Computer-Aided Process Planning and Scheduling in Shipbuilding", International Journal of Production Research, Vol. 45, No. 20, pp. 4653-4683, 2007.10.01

  2. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, "Optimal Scheduling of Block Lifting in Consideration of the Minimization of Traveling Distance While Unloaded and Wire and Shackle Replacement of a Gantry Crane", Journal of Marine Science and Technology, Vol. 15, No. 2, pp. 190-200, 2010.06.01

  3. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Seong-Jin Yoo, "An Algorithm for Generating the Hull Structural Analysis Model Using the Seam Information of the Hull Structure at the Initial Design Stage", Journal of Ship and Ocean Technology, Vol. 10, No. 4, pp. 24-33, 2006.12.01

  4. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, "Rapid Generation of the Piping Model Having the Relationship with a Hull Structure in Shipbuilding", Advances In Engineering Software, Vol. 38, No. 4, pp. 215-228, 2007.04.01

  5. No Image 02Dec
    by
    in International Journal

    Myung-Il Roh, Kyu-Yeul Lee, Woo-Young Choi, Seong-Jin Yoo, "Improvement of Ship Design Practice Using a 3D CAD Model of a Hull Structure", Robotics and Computer-Integrated Manufacturing Journal, Vol. 24, No. 1, pp. 105-124, 2008.02.01

  6. No Image 28Nov
    by
    in International Journal

    Myung-Il Roh, Sol Ha, "Advanced Ship Evacuation Analysis Using a Cell-Based Simulation Model", Computers In Industry, Vol. 64, No. 1, pp. 80-89, 2013.01.01

  7. No Image 03Feb
    by
    in International Journal

    Nam-Kug Ku, Ara Jo, Sol Ha, Myung-Il Roh, Kyu-Yeul Lee, "Automatic Generation of Equations of Motion for Multibody System in Discrete Event Simulation Framework", Procedia Technology, Vol. 1, No. 1, pp. 55-64, 2012.02.01

  8. No Image 20Aug
    by
    in International Journal

    Nam-Kug Ku, Ji-Hyun Hwang, Joon-Chae Lee, Myung-Il Roh, Kyu-Yeul Lee, "Optimal Module Layout for a Generic Offshore LNG Liquefaction Process of LNG-FPSO", Ships and Offshore Structures, Vol. 9, No. 3, pp. 311-332, 2014.05.01

  9. No Image 02Dec
    by
    in International Journal

    Nam-Kug Ku, Ju-Hwan Cha, Myung-Il Roh, Kyu-Yeul Lee, "A Tagline Proportional-Derivative Control Method for the Anti-Swing Motion of a Heavy Load Suspended by a Floating Crane in Waves", Journal of Engineering for the Maritime Environment, Vol. 227, No. 4, pp. 357-366, 2013.11.01

  10. No Image 20Aug
    by
    in International Journal

    Nam-Kug Ku, Myung-Il Roh, "Dynamic Response Simulation of an Offshore Wind Turbine Suspended by a Floating Crane", Ships and Offshore Structures, Vol. 10, No. 6, pp. 621-634, 2015.11.01

  11. No Image 01Dec
    by
    in International Journal

    Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Crane Modeling and Simulation in Offshore Structure Building Industry", International Journal of Computer Theory and Engineering, Vol. 6, No. 3, pp. 278-284, 2014.06.01

  12. No Image 20Aug
    by
    in International Journal

    Nam-Kug Ku, Sol Ha, Myung-Il Roh, "Design of Controller for Mobile Robot in Welding Process of Shipbuilding Engineering", Journal of Computational Design and Engineering, Vol. 1, No. 4, pp. 243-255, 2014.10.01

  13. No Image 15Dec
    by
    in International Journal

    Sang-Hyun Lee, Myung-Il Roh, Min-Jae Oh, Ki-Su Kim, "Optimal Layout Design of an LNG FPSO: A Case Study", Journal of Offshore Mechanics and Arctic Engineering, Vol. 142, No. 041403, pp. 1-17, 2020.08.01

  14. No Image 02Dec
    by
    in International Journal

    Sang-Uk Lee, Myung-Il Roh, Ju-Hwan Cha, Kyu-Yeul Lee, "Ship Compartment Modeling Based On a Non-manifold Polyhedron Modeling Kernel", Advances In Engineering Software, Vol. 40, No. 5, pp. 378-388, 2009.05.01

  15. No Image 31Mar
    by
    in International Journal

    Seong-Hoon Kim, Myung-Il Roh, Ki-Su Kim, Min-Jae Oh, “Big Data Platform Based on Hadoop and Application to Weight Estimation of FPSO Topside”, Journal of Advanced Research in Ocean Engineering, Vol. 3, No. 1, pp. 32-40, 2017.03.01

  16. No Image 03Mar
    by
    in International Journal

    Seong-Hoon Kim, Myung-Il Roh, Min-Jae Oh, Sung-Woo Park, "Estimation of Ship Operational Efficiency from AIS Data Using Big Data Technology", IJNAOE, Vol. 12, pp. 440-453, 2020.05.21

  17. No Image 26Aug
    by
    in International Journal

    Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Simulation of Load Lifting with Equalizers Used in Shipyards", Automation in Construction, Vol. 61, pp. 98-111, 2016.02.01

  18. No Image 04Oct
    by
    in International Journal

    Seung-Ho Ham, Myung-Il Roh, "Dynamic Analysis of Block Offloading Using Self-propelled Modular Transporters", Automation in Construction, Vol. 96, pp. 411-432, 2018.12.01

  19. No Image 03Nov
    by
    in International Journal

    Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, "Collision Detection and Response of Multibody Systems Using a Position Difference Method and Non-Interpenetration Constraint in Shipbuilding Simulation", Ocean Engineering, Vol. 195, pp. 1-18, 2020.01.01

  20. No Image 17Apr
    by
    in International Journal

    Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, "Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane", Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01

Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 Next
/ 10

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소