Skip to content
Extra Form
Abstract The motions of the mega floating crane and the lifted module must be evaluated in advance, to determine whether they satisfy the safety criteria or not. Due to the limitations of the existing dynamic analysis programs, we develop a differentiated program that is dedicated to the mega floating crane. This program is focused on reducing modeling time, while increasing modeling accuracy. Furthermore, it can model the block loader that distributes the tension in wire ropes between the lifted module and the block loader equally, and link beams that are used to connect hooks by hinge joints. The equations of motion based on multibody system dynamics are derived. Wave, wind, and current are included as external environmental loads. A direct volume calculation method below the water plane is adopted to find the buoyant force and center of buoyancy. External loads are verified by commercial program. Finally, the simulation results of the module erection are validated by comparison with the measurement of real operation.
Publication Date 2017-10-01
Role Corresponding Author
Category SCIE
Impact Factor 1.402

Seung-Ho Ham, Myung-Il Roh, Hye-Won Lee, Jin-Wuk Hong, Hong-Rae Lee, “Development and Validation of a Simulation-based Safety Evaluation Program for a Mega Floating Crane”, Advances In Engineering Software, Vol. 112, pp. 101-116, 2017.10.01


List of Articles
번호 분류 제목 Publication Date
142 Domestic Journal 서성호, 노명일, 구남국, 신현경, "통계적 방법을 이용한 부유식 해양 플랜트의 중량 추정용 간이 모델 연구", 대한조선학회 논문집, Vol. 50, No. 6, pp.373-382, 2013.12.01 file 2013-12-01
141 Domestic Journal 명세현, 노명일, 최형순, “조선 PLM을 위한 핵심 평가 지표 수립 방법론”, 한국CDE학회 논문집, Vol. 23, No. 1, pp. 60-67, 2018.03.01 file 2018-03-01
140 Domestic Journal 노명일, 최우영, 이규열, "쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 12, No. 5, pp. 321-329, 2007.10.01 file 2007-10-01
139 Domestic Journal 노명일, 최우영, 이규열, "선체 구조와의 연관성을 고려한 신속 배관 모델링 방법", 대한조선학회 논문집, Vol. 43, No. 2, pp. 258-267, 2006.04.01 file 2006-04-01
138 Domestic Journal 노명일, 임병석, '유전 알고리즘을 기반으로 한 조선소 블록 적치장의 재배치 최소화", 한국CAD/CAM학회 논문집, Vol. 16, No. 3, pp. 207-215, 2011.06.01 file 2011-06-01
137 Domestic Journal 노명일, 이상욱, 이규열, "구획 모델링 및 선박 계산 모듈을 이용한 함정의 최적 구획 배치 시스템 개발", 대한조선학회 논문집, Vol. 46, No. 4, pp. 424-434, 2009.08.01 file 2009-08-01
136 Domestic Journal 노명일, 이규열, 이정우, 이재승, "근골격계 질환 예방을 위한 조선용 작업 지원 로봇", 한국CADCAM학회 논문집, Vol. 14, No. 2, pp. 77-86, 2009.04.01 file 2009-04-01
135 Domestic Journal 노명일, 이규열, "협동 최적화 접근 방법에 의한 다분야 최적 설계에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 5, No. 3, pp.263-275, 2000.09.01 file 2000-09-01
134 Domestic Journal 노명일, 이규열, "초기 설계를 위한 자료 구조 및 모델링 함수 기반의 선체 구조 CAD 시스템 개발", 대한조선학회 논문집, Vol. 43, No. 3, pp. 362-374, 2006.06.01 file 2006-06-01
133 Domestic Journal 노명일, 이규열, "초기 선체 구조 모델을 기반으로 한 선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션", 대한조선학회 논문집, Vol. 43, No. 1, pp. 103-118, 2006.02.01 file 2006-02-01
132 Domestic Journal 노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 11, No. 2, pp. 115-127, 2006.04.01 file 2006-04-01
131 Domestic Journal 노명일, 이규열, "골리앗 크레인의 공주행 거리와 와이어 교체 최소를 고려한 최적 블록 리프팅 계획", 한국CAD/CAM학회 논문집, Vol. 15, No. 1, pp. 1-10, 2010.02.01 file 2010-02-01
130 Domestic Journal 노명일, 이규열, "객체 지향 초기 선체 구조 설계 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 10, No. 4, pp. 244-253, 2005.08.01 file 2005-08-01
129 Domestic Journal 노명일, 유성진, 이규열, "선체 구조 모델의 위상 정보 재구성을 통한 구조 해석 모델 생성", 대한조선학회 논문집, Vol. 43, No. 2, pp. 246-257, 2006.04.01 file 2006-04-01
128 Domestic Journal 노명일, "해상 정보 취득과 연료 소모량 추정을 기반으로 한 선박 경제 운항 경로 결정 방법", 한국CAD/CAM학회 논문집, Vol. 17, No. 2, pp. 71-78, 2012.04.01 file 2012-04-01
127 Domestic Journal 남권우, 노명일, 이혜원, 이원재, "자율 운항 선박을 위한 딥 러닝 기반 선박 이미지 분류 방법", 한국CDE학회 논문집, Vol. 26, No. 2, pp. 144-153, 2021.06.01 file 2021-06-01
126 Domestic Journal 김성훈, 노명일, 김기수, "조선 해양 산업에서의 응용을 위한 하둡 기반의 빅데이터 플랫폼 연구", 한국CAD/CAM학회 논문집, Vol. 21, No. 3, pp. 334-340, 2016.09.01 file 2016-09-01
125 Domestic Journal 김기수, 하솔, 구남국, 노명일, "잠수함 배치 설계에의 전문가 시스템 적용 방안에 대한 연구", 대한조선학회 논문집, Vol. 51, No. 2, pp. 138-147, 2014.04.01 file 2014-04-01
124 Domestic Journal 김기수, 노명일, 정양재, 나갑주, "해기상 예측 및 가시화를 위한 응용 프로그램", 한국CDE학회 논문집, Vol. 25, No. 4, pp. 434-444, 2020.12.01 file 2020-12-01
123 Domestic Journal 김기수, 노명일, 김성용, 안진우, "잠수함의 구획 및 장비 배치 최적화를 위한 배치 템플릿 모델", 한국CAD/CAM학회 논문집, Vol. 21, No. 1, pp. 51-60, 2016.03.01 file 2016-03-01
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 Next
/ 10

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소