Skip to content
Extra Form
Abstract It is difficult to observe the potential risks of lifting or turn-over operations in the early stages before a real operation. Therefore, many dynamic simulations have been designed to predict the risks and to reduce the possibility of accidents. These simulations, however, have usually been performed for predetermined and fixed scenarios, so they do not reflect the real-time control of an operator that is one of the most important influential factors in an operation; additionally, lifting or turn-over operations should be a collaboration involving more than two operators. Therefore, this study presents an integrated method for a collaborative simulation that allows multiple workers to operate together in the virtual world. The proposed method is composed of four components. The first component is a dynamic analysis that is based on multibody-system dynamics. The second component is VR (virtual reality) for the generation of realistic views for the operators. The third component comprises the control devices and the scenario generator to handle the crane in the virtual environment. Lastly, the fourth component is the HLA (high-level architecture)-based integrated simulation interface for the convenient and efficient exchange of the data through the middleware. To show the applicability of the proposed method, it has been applied to a block turn-over simulation for which one floating crane and two crawler cranes were used, and an offshore module installation for which a DCR (dual-crane rig) was used. In conclusion, the execution of the proposed method of this study is successful regarding the above two applications for which multiple workers were involved.
Publication Date 2019-07-01
Role Corresponding Author
Category SCIE
Impact Factor 0.930

Xing Li, Myung-Il Roh, Seung-Ho Ham, "A Collaborative Simulation in Shipbuilding and the Offshore Installation Based on the Integration of the Dynamic Analysis, Virtual Reality, and Control Devices", International Journal of Naval Architecture and Ocean Engineering, Vol. 11, No. 2, pp. 699-722, 2019.07.01


List of Articles
번호 분류 제목 Publication Date
61 Domestic Journal 구남국, 하솔, 노명일, "적응 제어 기반 Portable 용접 로봇 시뮬레이터 개발", 대한조선학회 논문집, 49권, 5호, pp. 400-409, 2012.10. file 2012-10-01
60 Domestic Journal 김기수, 노명일, 김성용, 안진우, "잠수함의 구획 및 장비 배치 최적화를 위한 배치 템플릿 모델", 한국CAD/CAM학회 논문집, Vol. 21, No. 1, pp. 51-60, 2016.03.01 file 2016-03-01
59 Domestic Journal 김기수, 노명일, 정양재, 나갑주, "해기상 예측 및 가시화를 위한 응용 프로그램", 한국CDE학회 논문집, Vol. 25, No. 4, pp. 434-444, 2020.12.01 file 2020-12-01
58 Domestic Journal 김기수, 하솔, 구남국, 노명일, "잠수함 배치 설계에의 전문가 시스템 적용 방안에 대한 연구", 대한조선학회 논문집, Vol. 51, No. 2, pp. 138-147, 2014.04.01 file 2014-04-01
57 Domestic Journal 김성훈, 노명일, 김기수, "조선 해양 산업에서의 응용을 위한 하둡 기반의 빅데이터 플랫폼 연구", 한국CAD/CAM학회 논문집, Vol. 21, No. 3, pp. 334-340, 2016.09.01 file 2016-09-01
56 Domestic Journal 남권우, 노명일, 이혜원, 이원재, "자율 운항 선박을 위한 딥 러닝 기반 선박 이미지 분류 방법", 한국CDE학회 논문집, Vol. 26, No. 2, pp. 144-153, 2021.06.01 file 2021-06-01
55 Domestic Journal 노명일, "해상 정보 취득과 연료 소모량 추정을 기반으로 한 선박 경제 운항 경로 결정 방법", 한국CAD/CAM학회 논문집, Vol. 17, No. 2, pp. 71-78, 2012.04.01 file 2012-04-01
54 Domestic Journal 노명일, 유성진, 이규열, "선체 구조 모델의 위상 정보 재구성을 통한 구조 해석 모델 생성", 대한조선학회 논문집, Vol. 43, No. 2, pp. 246-257, 2006.04.01 file 2006-04-01
53 Domestic Journal 노명일, 이규열, "객체 지향 초기 선체 구조 설계 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 10, No. 4, pp. 244-253, 2005.08.01 file 2005-08-01
52 Domestic Journal 노명일, 이규열, "골리앗 크레인의 공주행 거리와 와이어 교체 최소를 고려한 최적 블록 리프팅 계획", 한국CAD/CAM학회 논문집, Vol. 15, No. 1, pp. 1-10, 2010.02.01 file 2010-02-01
51 Domestic Journal 노명일, 이규열, "선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 11, No. 2, pp. 115-127, 2006.04.01 file 2006-04-01
50 Domestic Journal 노명일, 이규열, "초기 선체 구조 모델을 기반으로 한 선체 블록의 물량 정보 생성 및 블록 탑재 시뮬레이션", 대한조선학회 논문집, Vol. 43, No. 1, pp. 103-118, 2006.02.01 file 2006-02-01
49 Domestic Journal 노명일, 이규열, "초기 설계를 위한 자료 구조 및 모델링 함수 기반의 선체 구조 CAD 시스템 개발", 대한조선학회 논문집, Vol. 43, No. 3, pp. 362-374, 2006.06.01 file 2006-06-01
48 Domestic Journal 노명일, 이규열, "협동 최적화 접근 방법에 의한 다분야 최적 설계에 관한 연구", 한국CAD/CAM학회 논문집, Vol. 5, No. 3, pp.263-275, 2000.09.01 file 2000-09-01
47 Domestic Journal 노명일, 이규열, 이정우, 이재승, "근골격계 질환 예방을 위한 조선용 작업 지원 로봇", 한국CADCAM학회 논문집, Vol. 14, No. 2, pp. 77-86, 2009.04.01 file 2009-04-01
46 Domestic Journal 노명일, 이상욱, 이규열, "구획 모델링 및 선박 계산 모듈을 이용한 함정의 최적 구획 배치 시스템 개발", 대한조선학회 논문집, Vol. 46, No. 4, pp. 424-434, 2009.08.01 file 2009-08-01
45 Domestic Journal 노명일, 임병석, '유전 알고리즘을 기반으로 한 조선소 블록 적치장의 재배치 최소화", 한국CAD/CAM학회 논문집, Vol. 16, No. 3, pp. 207-215, 2011.06.01 file 2011-06-01
44 Domestic Journal 노명일, 최우영, 이규열, "선체 구조와의 연관성을 고려한 신속 배관 모델링 방법", 대한조선학회 논문집, Vol. 43, No. 2, pp. 258-267, 2006.04.01 file 2006-04-01
43 Domestic Journal 노명일, 최우영, 이규열, "쾌속 배관 라우팅 방법을 적용한 선체 구조 모델 기반의 배관 모델링 시스템 개발", 한국CAD/CAM학회 논문집, Vol. 12, No. 5, pp. 321-329, 2007.10.01 file 2007-10-01
42 Domestic Journal 명세현, 노명일, 최형순, “조선 PLM을 위한 핵심 평가 지표 수립 방법론”, 한국CDE학회 논문집, Vol. 23, No. 1, pp. 60-67, 2018.03.01 file 2018-03-01
Board Pagination Prev 1 2 3 4 5 6 7 8 9 10 Next
/ 10

Powered by Xpress Engine / Designed by Sketchbook

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소